This article was originally published by Lisa Egan at Tess Pennington’s ReadyNutrition.com
Tess is the author of The Prepper’s Blueprint: How To Survive ANY Disaster
There are many potential dangers associated with winter weather, but there’s one you might not have given much thought to: snow and ice on your home’s roof.
It is unclear how many deaths per year are caused by snow accumulations on roofs, but nearly every winter, there are reports of such deaths that appear in the news.
Roof collapse is a possible risk when snow accumulates on your roof, but it isn’t the only danger. In 2018, a chunk of snow about the size of a trailer fell from a roof and killed a mother and her 7-year-old son in Northern California. And, snow removal in itself carries the risk of injury and even death.
Here’s how to assess how much snow your roof can handle, how to determine if you need to remove snow, how to remove it safely, and the unique dangers that thawing ice and snow pose.
How much snow can your roof handle?
According to the Insurance Institute for Business & Home Safety (IBHS), unless your roof is damaged or decayed, it should be able to support 20 lb per square foot of snow before it becomes stressed.
These guidelines from IBHS can help you estimate how much snow is on your roof:
Fresh snow: 10–12 inches of new snow is equal to one inch of water, or about 5 lb per square foot of roof space, so you could have up to 4 feet of new snow before the roof will become stressed.
Packed snow: 3–5 inches of old snow is equal to one inch of water, or about 5 lb per square foot of roof space, so anything more than 2 feet of old snow could be too much for your roof to handle.
Total accumulated weight: 2 feet of old snow and 2 feet of new snow could weigh as much as 60 lb per square foot of roof space, which is beyond the typical snow load capacity of most roofs.
Ice: 1 inch of ice equals 1 foot of of fresh snow.
Here’s a quick method from Berlet Roofing you can use to estimate how much the snow on your roof weighs:
To check the snow load on your home, cut a 1-foot by 1-foot square the full depth of the snow from your roof into a plastic bag and weigh the bag. If there is any ice in your square foot, be sure to included it. The weight of the bag with the snow in it will tell you the weight of snow load per square foot on your roof.
Here’s a snow load calculation from Berlet Roofing:
(S x 1.25lbs)+(I x 5.2lbs) = P
S = inches of snow on the roof (depth)
1.25lbs= Approx weight of snow for each 1-inch of depth per sq ft
I = Inches of Ice Buildup on the roof (depth)
5.2lbs= Approx weight of ice for 1-inch of depth per sq foot
P =pounds per square foot (lbs/sq ft)
Example: If the snow on my roof is 20-inches deep with .5 inches of ice, what would that equate to?
(20-inch roof snow depth x 1.25 lbs/sq ft ) + (.5-inch roof ice depth x 5.1lbs/sqft)= 27.1 lbs per sq ft of roof snow load.
If you are in the “danger zone” based on the thickness of the various types of snow and ice (if they exceed 20–25 pounds per square foot), you should consider removing snow from your roof.
Watch for signs that your roof is over-stressed.
Over-stressed roofs typically display some warning signs. Wood and steel structures may show noticeable signs of excessive ceiling or roof sagging before collapsing.
FEMA recommends watching for these signs:
- Sagging ceiling tiles or boards, ceiling boards falling out of the ceiling grid, and/or sagging sprinkler lines and heads
- Sprinkler heads deflecting below suspended ceilings
- Popping, cracking, and creaking noises
- Sagging roof members, including metal decking or plywood sheathing
- Bowing truss bottom chords or web members
- Doors and/or windows that can no longer be opened or closed
- Cracked or split wood members
- Cracks in walls or masonry
- Severe roof leaks
- Excessive accumulation of water at non-drainage locations on low slope roofs
Here’s how to safely remove snow from your roof.
Experts say you should never attempt to remove snow from your roof by yourself. Dangers associated with roof snow and ice removal include sliding off the roof, falling off a ladder, overexertion, and injury from sliding snow.
For safe removal that won’t endanger you or damage your roof, use a snow rake with a long extension arm that will allow you to remove the snow while standing on the ground. Climbing onto your roof to remove snow is generally not advised, as falls are a serious risk, and so is damage to the roof.
If you feel you cannot safely remove the snow yourself, consider hiring a snow removal professional.
Here are a few snow removal tips from FEMA:
- Removing snow completely from a roof surface can result in serious damage to the roof covering and possibly lead to leaks and additional damage. At least a couple of inches of snow should be left on the roof.
- Do not use mechanical snow removal equipment.
- The risk of damaging the roof membrane or other rooftop items outweighs the advantage of speed.
- Do not use sharp tools, such as picks, to remove snow. Use plastic rather than metal shovels.
- When using a non-metallic snow rake, be aware that roof snow can slide at any moment. Keep a safe distance away from the eave to remain outside of the sliding range
Be sure no one is standing or walking in the areas where falling snow and/or ice may land.
Watch for icicles and be sure they won’t fall on anyone – an icicle falling from a low height can still cause injury.
Watch for ice dams.
An ice dam is a ridge of ice that forms at the edge of a roof and prevents melting snow (water) from draining off the roof. The water that backs up behind the dam can leak into a home and cause major damage to walls, ceilings, insulation, and other areas. Significant snow accumulations and extended periods of below-freezing temperatures increase the risk of ice dams developing.
“Melted snow runs down the roof under the snow cover and refreezes along overhangs where the roof surface temperature is lower. The water from the melting snow becomes trapped behind the dam of ice and can back up under shingles and infiltrate the underlayment, leading to leaks in the home,” the National Roofing Contractors Association (NRCA) explains.
Here’s a longer explanation of how ice dams form, from the University of Minnesota Extension:
There is a complex interaction among the amount of heat loss from a house, snow cover and outside temperatures that leads to ice dam formation. For ice dams to form there must be snow on the roof, and, at the same time, higher portions of the roof’s outside surface must be above 32 degrees F while lower surfaces are below 32. For a portion of the roof to be below 32, outside temperatures must also be below 32. When we say temperatures above or below 32, we are talking about average temperature over sustained periods of time.
The snow on a roof surface that is above 32 will melt. As water flows down the roof it reaches the portion of the roof that is below 32 and freezes. Voila! – an ice dam.
The dam grows as it is fed by the melting snow above it, but it will limit itself to the portions of the roof that are on the average below 32. So the water above backs up behind the ice dam and remains a liquid. This water finds cracks and openings in the exterior roof covering and flows into the attic space. From the attic it could flow into exterior walls or through the ceiling insulation and stain the ceiling finish.
There are roof and gutter de-icing kits you can buy that may help make the job a bit easier.
When the snow melts, it doesn’t necessarily mean you are out of danger.
When the end of winter approaches, the NRCA recommends checking your roof, gutters, downspouts, and drains for debris to ensure water from melting snow and ice and spring rain will properly drain from your roof:
Homeowners also should look to determine that the winter’s snow and ice has not damaged roof shingles or flashings or loosened sheet-metal openings. In addition, homeowners should check for signs of leakage around roof hatches, skylights and vents. Shingles around gutters should also be checked for damage from melting ice dams. If a roof has leakage due to ice damming, the damage should be inspected by an NRCA member contractor.
If you cannot safely evaluate your roof, experts advise hiring a roofing professional to do it for you.
Tess Pennington is the author of The Prepper’s Blueprint, a comprehensive guide that uses real-life scenarios to help you prepare for any disaster. Because a crisis rarely stops with a triggering event the aftermath can spiral, having the capacity to cripple our normal ways of life. The well-rounded, multi-layered approach outlined in the Blueprint helps you make sense of a wide array of preparedness concepts through easily digestible action items and supply lists.
Tess is also the author of the highly rated Prepper’s Cookbook, which helps you to create a plan for stocking, organizing and maintaining a proper emergency food supply and includes over 300 recipes for nutritious, delicious, life-saving meals.
Visit her website at ReadyNutrition.com for an extensive compilation of free information on preparedness, homesteading, and healthy living.
Click here to subscribe: Join over one million monthly readers and receive breaking news, strategies, ideas and commentary.
Please Spread The Word And Share This Post
Author:
Lisa Egan
Views:
Read by 627 people
Date: February 11th, 2019
Website: https://readynutrition.com/
Copyright Information: This content has been contributed to SHTFplan by a third-party or has been republished with permission from the author. Please contact the author directly for republishing information.
