Golden Peaks Resources Ltd. Phase 1 Drill Program At Tanoyan Gold Project Successfully Completed by 24hgold

News Release - Wednesday, January 18, 2012
Phase 1 Drill Program At Tanoyan Gold Project Successfully Completed

Phase 1 drilling completed with a total of 44 drill holes 5041.8 meters
88% of drillholes intersected reportable gold
Updated 43-101 resource estimate to be undertaken
10,000 meter Phase 2 drilling program to commence
January 18, 2012 - Reliance Resources Limited (TSX: RI) (the company) is pleased to announce a summary of its recently completed Phase 1 drilling program on the Tanoyan Gold Project, North Sulawesi, Indonesia
The Tanoyan Gold Project consists of five principal vein systems, Sondana, Ramai, Talong, Modupola and Lingkobungon, which are predominantly orientated northeast to southwest and dip steeply to the northwest or southeast. Drilling to date has primarily focused on the Sondana and Modupola veins.

The Phase 1 drilling program is now complete and includes a total of 5,041.8 meters over 44 drillholes Details of all drillholes are located in Table 1 ( http://www.goldenpeaks.com/i/misc/Drillhole-meters.jpg) and location of drillholes is shown on Figure 1 (http://www.goldenpeaks.com/i/misc/Tanoyan-Drill-Plan-location-Golden-Peaks-Phase.jpg)

This drill program was designed to increase the size and improve the classification of the existing 43-101 Inferred Mineral Resource of 2.22 Mt at 1.3 g/t for 91,100 ounces of contained gold. The company is confident that this successful completion of the Phase 1 drilling program has resulted in a material increase in the size of the mineral resource at the Tanoyan Gold Project.

Preparations are currently underway for the Phase 2 drill program which will include 10,000 metres of diamond drilling and is designed to further explore the potential of the Tanoyan epithermal gold vein system and to form the basis of ongoing studies to ascertain the commercial viability of a large gold mine at Tanoyan.

Phase 1 systematic drilling has confirmed that gold mineralisation along the Sondana Vein occurs over a strike length of approximately 2.0 kilometres, extending from surface to a minimum of 100 metres vertical depth over much of its length. The vein is still open to the north and open down-dip over much of its length. The Sondana vein includes drill intercepts of auriferous zones of up to 40 metres true width.

>From surface indications, the Sondana Vein system extends an additional 1.1 Km north from TND 079 (32.1m @ 2.1 g/t Au) giving an overall strike potential of at least 3.1 kilometres. This northern extension will be a priority target during the Phase 2 drill program. (Inset A) http://www.goldenpeaks.com/i/misc/Sondana-Vein-Phase-1-Drilling.jpg)

Experience from drilling the Sondana North zone during the Phase 1 program has shown that deeper drilling intersected mineralisation of higher grade and greater widths than encountered in historical drillholes; also updated detailed mapping and surface sampling of the vein system, from Phase 1, has advanced the company's understanding of structural controls of the mineralisation.

The other vein systems at Tanoyan include, the Modupola-Talong and Lingkobungon Vein systems,
(Inset B) http://www.goldenpeaks.com/i/misc/Modulopa-and-Talong-drill-map.jpg); They have also provided significant intersections (TND076: 17.65m @ 3.8 g/t Au and TND056: 16.45m @ 2.0 g/t Au). In addition to following up extensions along strike and down-dip to known mineralisation at Sondana and additional drilling at the Talong-Modupola and Lingkobungon vein systems, Phase 2 drilling will also target the Ramai Vein located 700 metres west of Sondana (Figure 1).

This 1.7Km long Ramai Vein has only been tested by 6 historical drillholes, several of which intersected significant gold mineralisation such as TND037: 7m @ 5.3 g/t Au and 2m @ 5.2 g/t Au and TND018: 16m @ 0.6 g/t Au. The continuous nature of the Ramai Vein as seen on surface suggests it has similarities with the Sondana Vein.

President Scott Emerson commented: "The Phase 1 drilling program has been a significant step in advancing the Tanoyan Gold Project and drilling has provided consistently strong results throughout the program. We are looking forward to having the same success during the next Phase 2, 10,000 meter drill program which is aimed at further gold discovery and the delineation of a mineral resource sufficient to form the basis of, eventually, a large mining and milling operation. "

The company has a portfolio of five mineral tenements covering 68,000 acres on the islands of Sulawesi and Halmahera in East Indonesia.

The company is active on three of its five Indonesian gold projects; currently preparing for Phase 2 drilling on the Tanoyan Gold Project and conducting surface exploration programs, in preparation for drilling, on the Kapa Kapa Gold Project and the Roko Gold Project. All of the projects have easy access via paved and/or gravel roads and the regional infrastructure is good

The projects offer both exploration potential and an existing resource base. All five projects are adjacent to or along strike from operating gold mines or identified gold resources with similar geology and structural feature. Importantly, all projects have been converted to IUP tenements as required under the new Indonesian Mining Act (2009).
All samples were assayed by Intertek Indonesia; a division of the global Intertek Group PLC.

Core is collected and initially logged at Tanoyan Base Camp at the project area. The core is then securely transported in closed core boxes to Golden Peaks' Exploration Office in Kotamobagu, North Sulawesi. Here the core is logged in detail, cut longitudinally into 2 equal halves and half-core is sampled at 1 meter intervals; except where the geology dictates a lesser sampling interval. Half core is permanently retained, as a reference, in the secure Kotamobagu core-storage facility. All QC samples are introduced before the bagged samples are trucked to PT Intertek Laboratory's sample preparation facility in Manado. Prepared samples are then couriered by PT Intertek to their analytical facility in Jakarta for analyses.

Gold is fire assayed using a 50.0 gram aliquot sample with an AA finish. Multi-element analysis is by Four Acid Digestion using an Induced Coupled Plasma (ICP) finish.

The Company's QA/QC program now includes the regular insertion of blanks, multiple certified assay standards into the sample shipments. Locally-sourced blank samples are inserted in every assay batch of 10 samples. Commercial standards are inserted in every assay batch of 25 samples. Sludge samples are also collected and assayed on a 1 metre interval from the drilling fluid circulation return. Regular monitoring of these QC samples is a critical part of Golden Peak's QA/QC protocols.

This press release has been reviewed and approved by Mr. John Levings, B.Sc., FAusIMM, director of Golden Peaks Resources Limited and a Qualified Person as defined by National Instrument 43-101, under whose direction the exploration programs are being carried out.

Media Information, contact:
Scott Emerson, President
se@relianceresources.com

Investor Information, contact:
Mike Kordysz
mk@relianceresources.com

The statements herein that are not historical facts are forward-looking statements. These statements address future events and conditions and so involve inherent risks and uncertainties, as disclosed under the heading "Risk Factors" in the company's periodic filings with Canadian securities regulators. Actual results could differ from those currently projected. The Company does not assume the obligation to update any forward-looking statement.

Table 2: Phase 1 Drill Results

DH No.	Vein	From (m)	To (m)	Interval (m)	Au (g/t)
TND045	Sondana	0.00	16.10	16.10	0.8
	incl	4.10	4.90	0.80	4.3
TND046	Sondana	77.00	78.00	1.00	0.7
TND047	Sondana	did not effectively test Sondana vein
TND048	Sondana	44.20	49.20	5.00	2.9
TND049	Sondana	10.93	30.70	19.77	1.6
	Sondana	132.10	134.50	2.40	0.9
	Sondana	144.50	145.40	0.90	0.9
TND050	Sondana	55.60	71.10	15.50	3.1
	incl	63.00	63.90	0.90	12.4
	and	69.10	70.10	1.00	23.2
TND051	Sondana	14.60	22.30	7.70	0.9
TND052	Modupola	44.10	45.10	1.00	1.7
TND053	Sondana	18.00	30.30	12.30	1.7
TND054-R	Sondana	49.30	50.50	1.20	1.5
TND055	Modupola	did not effectively test Sondana vein
TND056	Modupola	73.90	90.35	16.45	2.0
	incl	73.90	83.30	9.40	3.1
	incl	73.90	78.50	4.60	5.7
		113.45	115.70	2.25	7.1
TND057	Sondana	126.10	131.55	5.45	2.3
TND058	Modupola	124.75	127.75	3.00	3.2
TND059	Sondana	137.80	144.15	6.35	1.0
TND060	Modupola	no significant intersections
TND061	Sondana	60.30	79.65	19.35	0.9
	incl	60.30	65.70	5.40	1.4
	incl	74.75	79.65	4.90	1.6
TND062	Modupola	40.90	44.90	4.00	0.8
TND063	Sondana	17.30	24.60	7.30	7.2
	incl	22.30	23.60	1.30	38.2
		27.60	28.60	1.00	0.9
TND064	Modupola	79.25	81.35	2.10	8.7
		86.50	90.75	4.25	0.9
		138.30	139.30	1.00	1.0
TND065	Sondana	did not effectively test Sondana vein
TND066	Modupola	29.70	43.55	13.85	1.0
	incl	40.00	41.90	1.90	3.5
TND067	Sondana	10.55	11.55	1.00	0.4
TND068	Modupola	77.70	79.10	1.40	2.3
TND069	Sondana	11.20	13.50	2.30	0.5
TND070	Modupola	51.10	65.00	13.90	0.8
	incl	51.10	55.95	4.85	1.0
	incl	62.20	64.00	1.80	2.4
TND071	Sondana	14.65	15.90	1.25	0.4
TND072	Modupola	57.15	58.55	1.40	1.0
TND073	Sondana	149.00	159.70	10.70	1.6
		171.20	172.20	1.00	0.6
		178.00	183.30	5.30	0.5
TND074	Modupola	63.30	67.10	3.80	0.5
		78.20	87.80	9.60	1.1
		100.40	107.00	6.60	1.3
TND075	Sondana	4.50	8.50	4.00	1.8
		79.30	81.30	2.00	1.5
		96.20	115.05	18.85	4.4
	incl	98.25	100.25	2.00	33.0
TND076	Modupola	69.85	87.50	17.65	3.8
	incl	81.10	87.50	6.40	7.8
TND077	Sondana	63.50	64.50	1.00	1.9
		72.00	144.00	72.00	1.0
	incl	116.10	129.00	12.90	2.4
TND078	Talong	11.70	13.70	2.00	1.4
		19.70	24.35	4.65	1.5
		28.90	31.50	2.60	0.9
TND079	Sondana	80.50	112.60	32.10	2.1
	incl	105.50	110.60	5.10	4.6
TND080	Talong	intersected artisanal mine opening
TND081	Sondana	46.60	48.10	1.50	0.3
TND082	Talong	no significant intersections
TND083	Sondana	21.30	24.10	2.80	2.1
TND084	Talong	no significant intersections
TND085	Sondana	31.40	35.40	4.00	1.4
TND086	Ling Atas	31.55	36.9	5.35	2.0
		36.1	36.9	0.80	8.8
		63.75	64.9	1.15	1.2
TND087	Sondana	37.45	52.40	14.95	0.8
		55.40	58.40	3.00	0.5

Drill hole data for the holes reflect down hole core lengths. True widths cannot be reliably estimated at this time

Légende
	Production
	Mine développement
	Découverte
	Exploration
	Ancien producteur
Sur Google Earth, cliquez sur les pictogrammes, pour voir les informations du projet, accéder à sa page, ou à la page de la compagnie.