Helio Resource Corp Discovers Multiple Zones of Gold Mineralisation at SMP Gold Project, Porcupine Target

Tuesday, July 12, 2011

Latest drilling discovers multiple zones of gold mineralisation at Porcupine Target - SMP Gold Project, Tanzania

View this News Release in PDF Format

Helio Resource Corp (TSX-V: HRC) is pleased to announce the drill results from the second batch of drill holes (15 holes, including extensions of previous holes, for a total of 1,604m of Diamond drilling) of this year's 20,000m drill campaign at the SMP Gold Project, Tanzania.

The drill results come from exploration of the footwall to the Porcupine Main Zone, and the area northeast of the Quill Zone.

Highlights

Multiple zones of gold mineralisation in the footwall of Porcupine Main Zone discovered:
- GPD 40 - 5m grading 2.1g/t Au and 24m grading 1.1g/t Au
- GPD 41 - 27m at 1.0g/t Au and 1m at 11.2g/t Au and 30m at 0.8g/t Au
- GPD 94 - 19m at 1.1g/t Au
- GPD 111 - 16.3m at 1.1g/t Au
- GPD 112 - 34m at 0.7g/t Au
The footwall zones open up a large area to the west of the resource for further expansion
Multiple zones of mineralisation found to the NE of the Quill Target, including;
- GPD 103 - 1m at 4.2g/t Au
- GPD 108 - 3m at 2.6g/t Au
The intercepts at Quill are 250m NE of any previous drilling and remain open to the northeast.

A complete table of drill hole results is presented below.

PORCUPINE MAIN ZONE DRILLING

The drill results confirm the presence of multiple zones of mineralisation in the footwall of the main Porcupine Target. The footwall zones are open along strike to the NE and SW, and to depth.

Drill hole GPD94, which already had a reported intercept of 12m grading 2.5g/t Au (see Company press release dated June 7, 2011) was extended and intersected a second mineralised zone at depth - 19m grading 1.1g/t Au from 162m.

Subsequently, holes GPD40 and GPD41 (originally drilled in 2009) were extended and also intercepted additional zones of mineralisation (see table below).

Two additional drill holes, GPD111 (16.3m at 1.0g/t Au) and GPD112 were drilled to test the footwall zones at a shallower depth. Notably, GPD112 intercepted another zone of footwall mineralization, returning 34m grading 0.7g/t Au from 97m downhole depth - see table below.

All the updated data will be available to view as a 3D model on http://www.corebox.net/properties/smp.

Porcupine was one of the only two targets included in the initial NI 43-101 compliant resource calculation published in November 2010 (see news release dated November 30, 2010). Gold mineralisation has been identified in a total of 30 targets in the SMP project area.

QUILL ZONE DRILLING

On the Quill zone, a N-S fence of drill holes was drilled across a 400m-wide shear zone 250m NE of all previous drilling. The drill fence intersected 5 discrete mineralised zones, of which GPD108 contained the best intercept; 3m grading 2.6g/t Au.

Table of Significant Drill Intercepts

Drill hole #	Zone	From (m)	Width (m)	Grade (g/t Au)
GPD40	Main	94*	5	2.1
And		112*	24	1.1
And		150	16	0.6
And		195	16	0.3
GPD41	Main	116*	27	1.0
And		160	1	11.2
And		210	30	0.8
GPD94	Main	67*	12	2.5
And		162	19	1.1
GPD101	Quill	52	1	1.0
GPD102	Quill	33	1	0.8
GPD103	Quill	59	1	4.23
GPD105	Quill	95	1	0.9
GPD106	Quill	93	2	1.1
GPD107	Quill	97	1	0.6
GPD108	Quill	29	3	2.6
GPD109	Quill	41	1	1.4
GPD111	Main	6.7	16.3	1.0
And		196	1	3.1
GPD112	Main	97	34	0.7
And		184	1	2.2

* = Previously reported intercept

Drilling Update

The Company has two Diamond drill rigs working on the SMP Gold Project at present. One is currently drilling the Chura Target, located 5km west of Porcupine. Chura is a coincident gold-in-soil and magnetic anomaly that extends over a 1km distance from NW to SE. Rock samples taken from artisanal pits within the Chura Target area returned assays up to 159.0g/t Au.

The second drill rig is currently drilling 100m-spaced holes at the Gap target. Gap is a historical mine, located 2km from Porcupine, and lies on a 700m long NE-SW trending magnetic anomaly. One RC drill hole (GPR3) has been drilled into the main anomaly and this intercepted 8m grading 1.2g/t Au.

Helio is looking to add a third drill rig to the SMP programme to further explore the Konokono and Kipanga Targets. The 6.5km section running from Kipanga through Konokono to Chura covers a section of the Saza Shear Zone that is considered (along with the Porcupine -- Gap section) to be the most prospective within the SMP. The last drill hole at the Konokono Target intersected 13.1m grading 3.7g/t Au (see news release dated February 23, 2009).

About the SMP Gold Project

The SMP Gold Project covers an area of 238km². Gold mineralisation has been identified in 30 targets within the project area. Two of these targets, Porcupine and Kenge, have been advanced to the resource stage and both, especially Porcupine, still have potential to grow significantly. The unrestrained resource calculation as released in November 2010 reported a Measured and Indicated Resource of 589,497 ounces at 1.51g/t Au plus an Inferred Resource of 353,097 ounces at 1.12g/t Au at a cut off grade of 0.3g/t.

Mineralisation at all 30 targets outcrops at surface, and varies from narrow, high grade gold mineralisation hosted in quartz veins and shear zones, to wide zones (up to 90m in width) of lower grade, bulk mineable / open pittable mineralisation.

Helio owns a 100% interest in four of five licences, subject to a 2% NSR to the vendors (Tanzanian small mining companies), and the Company is in the process of earning a 100% interest in the fifth licence.

Chris MacKenzie, M.Sc., C.Geol., Helio's COO and a Qualified Person as designated by NI 43-101, supervises the exploration at the SMP project, including the sampling and quality assurance / quality control programmes, and has reviewed the contents of this news release. Holes were drilled at between -48� -75�. Intercepts are reported as drilled widths, true widths are estimated to be approximately 70-95% of the drilled widths. Continuous 1m samples were taken every through the main mineralised zones, and 2m samples were taken outside this. Samples were split with a core saw and one half was retained on site. All samples were submitted to the lab with internal QA/QC checks including the use of blanks and standards (ave. 1 every 17 samples) and duplicates (ave. 1 every 25 samples). Samples were assayed at the SGS Laboratory in Mwanza, Tanzania by 50g gold fire assay. As well as the Company's internal QA/QC programme, SGS also applied their own internal QA/QC programme, consisting of insertion of standards and duplicates. Weighted average intercepts are calculated using a 0.5g/t Au cut-off, unless otherwise stated and may include some mineralised waste.

For additional information, please contact Richard Williams or Irene Dorsman at +1 604 638 8007 or by e-mail to richard@helioresource.com or irene@helioresource.com.

ON BEHALF OF THE BOARD OF DIRECTORS

"Richard D. Williams"
Richard D. Williams, P.Geo
CEO

"Chris MacKenzie"
Christopher J. MacKenzie, C.Geol.
COO

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

You can also view this News Release on our website at:
http://www.helioresource.com/s/NewsReleases.asp?ReportID=466244

Helio Home | Contact Us | Investors | Corporate

Legends
	Production
	Mine development
	Discovery
	Exploration
	Past producer
On Google Earth, click on the button, to show property information, and access to project page or company page.

Helio Resource Corp

Discovers Multiple Zones of Gold Mineralisation at SMP Gold Project, Porcupine Target - Tanzania

Helio Resource Corp