Asian Mineral Resources Limited Ban Phuc Project Development Progress Update by 24hgold

Marketwire


Asian Mineral Resources Limited
TSX VENTURE:	ASN

Other Recent News

September 4, 2008

Asian Mineral Resources: Ban Phuc Project Development Progress Update

TORONTO, ONTARIO--(Marketwire - Sept. 4, 2008) - Asian Mineral Resources Limited ("AMR" or the "Company") (TSX VENTURE:ASN) is pleased to provide an update on its construction and development activities at its 90% owned Ban Phuc Nickel-Copper Project in north Vietnam.

Ban Phuc Development Project:

Construction of the project is on target for commissioning early in the 2nd quarter of 2009. All key operating staff are on board and drill results of the resource inside the Mining License add further confidence to the reserve model. Relations with the community and local authorities remain excellent.

Process Plant and Infrastructure Construction

- Construction of the internal Process Plant access roads and related drainage completed

- Plant and infrastructure earthworks completed

- Engineering, Procurement, Construction and Management ('EPCM') contractor has mobilized to the site

- Concrete contract has been awarded and the contractor has commenced work on site

- Ball mill refurbishment in progress and on schedule for dispatch from Australia in the third quarter 2008

- Construction of the 300 bed camp is progressing well and is expected to be complete in the 3rd quarter

- Site preparation of the Tailing Storage Facility is underway and mobilisation of the contractor is on target to commence in late September when the end of the rainy season is expected to allow unrestricted access of earthmoving equipment

Underground Mine Development

- The upper and lower portals are completed

- Development of the lower portal (main haulage ramp) is on schedule - 422 meters advanced and is 40 meters from the orebody

- The cross cut to the western ore pass has advanced 22 meters from the ramp and is 20 meters from the target position of the first raisebore hole

- Progress of the upper access drive has been impacted by its proximity to surface and the weathered ground has required more support than expected. It is now in competent rock and has just 120 meters to complete before intersecting the orebody

- A contract for the excavation of the vertical raises for ore passes and ventilation has been awarded - the contractor has mobilized to site and piloting of the first hole is due to commence in mid September

Mine Definition Drilling

A Diamond drilling program within the Mining License has been developed with two primary objectives:

- In-fill drilling of the massive reserves to facilitate mine planning and stope design. This is being carried out by underground drilling from the existing adits supplemented by surface drilling in deeper areas

- Development of the disseminated nickel resource - testing of the zone adjacent to the massive reserves is designed to determine whether a higher grade section(s) exists in minable dimensions

Massive Sulphide Reserve Confirmation

- 53 'in-fill' holes drilled from the adits have been completed for a total of 1,889 meters

- A detailed analysis of the in-fill drilling over a 100m x 25m section of strike adjacent to adit 301 (which contains close to 10% of the resource) has been completed and compared with the original geological model. The results indicate that:

1) small changes in the geometry of the mineralised areas can be expected, these have the potential to result in a modest loss in tonnage,

2) previous estimates for total metal content may be understated as a number of higher grade drill intersections have been recognized. While it is not possible to quantify this until the drill program is completed and a revised resource calculated, it is considered to be encouraging.

Long Section looking north showing widths of massive sulphide reserves is available at the following web link: http://media3.marketwire.com/docs/asndiagram1.jpg

- Key results from the drilling along adit 301 include the following:

----------------------------------------------------------------------------
Hole         From       To     Intercept        True      Ni     Cu      Co
ID             (m)      (m)     Width (m)   Width (m)      %      %       %
----------------------------------------------------------------------------
BP301-4     16.60    23.20           6.6         4.2     3.5    1.4     0.1
----------------------------------------------------------------------------
BP301-5     22.00    24.50           2.5         2.0     6.8    1.9     0.2
----------------------------------------------------------------------------
BP301-6     46.90    52.50           5.6         3.0     6.6    1.7     0.2
----------------------------------------------------------------------------
BP301-18    48.30    54.70           6.4         2.2     5.8    1.7     0.2
----------------------------------------------------------------------------
BP301-18A   34.35    36.95           2.6         2.6     6.7    2.3     0.2
----------------------------------------------------------------------------
BP301-19    16.00    17.90           1.9         1.3     6.9    0.6     0.2
----------------------------------------------------------------------------
            21.40    26.00           4.6         3.1     5.2    1.8     0.1
----------------------------------------------------------------------------
            33.90    35.10           1.2         0.8     4.2    1.0     0.1
----------------------------------------------------------------------------
BP301-23    32.30    44.40          12.1         7.1     4.4    1.6     0.1
----------------------------------------------------------------------------
BP301-24    12.00    26.50          14.5        13.9     1.9    0.5     0.1
----------------------------------------------------------------------------
BP301-25    25.65    31.00           4.8         3.8     3.6    1.5     0.1
----------------------------------------------------------------------------
            34.60    48.40          13.8        10.9     4.2    1.9     0.1
----------------------------------------------------------------------------
BP301-28     8.30    12.00           3.7         3.3     1.8    0.9     0.0
----------------------------------------------------------------------------
            18.76    23.00           4.2         3.9     5.8    1.5     0.2
----------------------------------------------------------------------------
BP301-30    24.00    31.50           7.5         7.4     3.9    1.7     0.1
----------------------------------------------------------------------------

Disseminated Sulphide Resource Evaluation

- Drilling of the disseminated resource lying within the Mining License ('ML') and below the base of oxidation is well underway with receipt of the results from 10 holes drilled from surface. The target area extends over a strike of 150 meters and drilling to date has confirmed the presence of a zone with elevated grades as reported in the table below:

----------------------------------------------------------------------------
Hole ID      From (m)    To (m)   Intercept (m)  True Width (m)  Ni %  Cu %
----------------------------------------------------------------------------
BP07-01        70.00     78.00            8.00            4.59   0.95  0.22
----------------------------------------------------------------------------
BP07-02        58.10     66.45            8.35            4.79   0.76  0.67
----------------------------------------------------------------------------
               74.00     82.00            8.00            4.59   0.84  0.34
----------------------------------------------------------------------------
BP07-03        89.90    101.00           11.10            6.37   0.93  0.08
----------------------------------------------------------------------------
BP07-04        52.96     55.90            2.94            1.69   2.50  0.76
----------------------------------------------------------------------------
BP08-01       163.75    164.90            1.15            0.74   6.68  2.31
----------------------------------------------------------------------------
BP08-02       187.85    195.90            8.05            4.62   1.79  0.57
----------------------------------------------------------------------------
BP08-03       154.40    160.00            5.55            5.00   0.68  0.54
----------------------------------------------------------------------------
BP08-05       165.30    180.00            14.7            8.10   0.57  0.06
----------------------------------------------------------------------------
BP08-09        82.00    107.20            25.2            20.0   1.33  0.20
----------------------------------------------------------------------------
BP08-12        61.40     82.00            20.6            16.9   1.01  0.46
----------------------------------------------------------------------------

- These results indicate the presence of a zone of greater than 0.7% Ni, drilling is continuing and it is anticipated that the program will be completed and a resource calculated in the 4th quarter.

- Preliminary metallurgical testwork carried out on a bulk sample taken from the adits indicates that a saleable concentrate can be produced with minimal changes to the existing flowsheet. Confirmatory testwork is planned on a composite sample to be collected from select core taken from the current drilling program.

Exploration:

- Exploration activities in the areas around the mine continued with the primary focus in the 2nd quarter being the completion of a series of Fixed Loop Electro Magnetic surveys. Overall, 1097 stations were acquired for a total of 52 line km of data (7 fixed loops and 49 survey lines) over 4 prospect areas. Preliminary assessment of the data has identified five anomalies and, subject to final review, drilling of these targets will commence in the 3rd quarter, weather permitting. These five targets have been identified as follows:

-- Adit 7 (approx 1km east of Ban Phuc ML) - 1x deep, moderate-weak conductor

-- Suoi Tao (approx 6km east of Ban Phuc ML) - 2x conductors, one strong and one moderate

-- BanTran (approx 3km SE of Ban Phuc ML) - 1x strong conductor

-- Co Muong (approx 4km SE of Ban Phuc ML) - 1x weak conductor

A map of the five targets is available at the following web link: http://media3.marketwire.com/docs/asndiagram2.jpg

- Drilling of these anomalies has commenced, with:

-- Two holes completed in Ban Trang which intersected an unmineralised graphitic horizon

-- At Suoi Tao drilling of the moderate conductor has commenced. A previous hole to the south of the anomaly intersected low grade disseminated sulphides within what is likely a continuation of the same ultramafic dyke.

- An agreement to supply three drill rigs has been concluded with an Indonesian contractor, which will increase the current drill fleet and allow a more detailed program of follow up drilling. The first rig is expected on site in September.

Grade calculations are based on a 0.4% Ni lower cut off to define the mineralised structure, with no upper cut. Analytical work is being carried out at the independent ALS Laboratory Group., Perth, Australia. Analysis is by ICP from a four acid digest. Blanks and standards are being used to monitor laboratory performance during the analysis. This press release has been reviewed by in-house qualified person Simon Mottram, Member of the Australian Institute of Mining and Metallurgy (AusIMM).

Liquidity

At June 30, the Company had on hand cash and cash equivalents of $28.5 million. This amount was reduced to a current level of $14 million, with most of the expenditures having been incurred for the project development described above. As previously disclosed, the Company requires a further $45 million for project completion and other budgeted expenditures. Negotiations are ongoing for the financing of this amount.

Company Profile:

AMR is developing the Ban Phuc Nickel-Copper Project in which it has a 90% interest. The Project based on current reserves is designed to produce some 5,500 tonnes pa of nickel and associated copper credits in concentrate in the first two years and average 4,500 tonnes pa of nickel over the mine life. Commercial sulphide concentrate production is scheduled in the second quarter of 2009. The Company has also reinstituted a regional exploration program around its Ban Phuc Nickel Project.

For further details on the Company and the Ban Phuc Nickel Project please refer to the website at www.asianminres.com.

Forward-Looking Statements

This press release includes certain "Forward-Looking Statements." All statements, other than statements of historical fact, included herein, including without limitation, statements regarding potential mineralization and reserves, exploration results and future plans and objectives of Asian Mineral Resources Limited are forward-looking statements that involve various risks and uncertainties. There can be no assurance that such statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Important factors that could cause actual results to differ materially from Asian Mineral Resources Limited's expectations are disclosed under the heading "Risk Factors" and elsewhere in Asian Mineral Resources Limited documents filed from time-to-time with the TSX Venture Exchange and other regulatory authorities.

The TSX Venture Exchange has not reviewed and does not accept responsibility for the adequacy or accuracy of this news release.

CONTACT INFORMATION:

Asian Mineral Resources Limited
Collin Ellison
President and CEO
(416) 360-3412
Fax: (416) 367-1954
Email: info@asianminres.com
Website: www.asianminres.com

INDUSTRY: Manufacturing and Production - Mining and Metals

Footer

Legends
	Production
	Mine development
	Discovery
	Exploration
	Past producer
On Google Earth, click on the button, to show property information, and access to project page or company page.