TORONTO, Jan. 16, 2018 (GLOBE NEWSWIRE) -- Eloro Resources Ltd. (ELO.V) (FSE:P2Q) (“Eloro” or the “Corporation”) is pleased to announce that it has completed 2,261m of reconnaissance Diamond drilling in 8 holes at the Rufina Target on the La Victoria Au Property in the North-Central Mineral Belt of Peru. Figure 1 is a plan map showing locations of the drill holes and hole traces. Holes ERU-01, -02, -03, -04 and -09 are on a NE-SW cross section approximately 800m long. Holes ERU-06, -07 and -08 are on a parallel cross section 500m long approximately 100m north of the first section. Significant values are shown in Table 1 below. Highlights include (all core lengths):
- 3.46 g Au/t over 7.4m including 7.31 g Au/t over 3.4m and 2.73 g Au/t over 1.5m in Hole ERU-02
- 2.10 g Au/t over 4.5m including 4.31 g Au/t over 1.6m and 2.73 g Au/t over 1.5m in Hole ERU-04
- 1.86 g Au/t over 3.0m including 4.31g Au/t over 1.0m in Hole ERU-01
- 2.83 g Au/t over 1.0m in Hole ERU-03
- 1.92 g Au/t over 1.40m over 1.4m in Hole ERU-09A
- 0.66 g Au/t over 5.0m including 8.67 g Au/t over 0.4m in Hole ERU-09A
- 0.35 g Au/t over 19.5m in Hole ERU-04
Drill holes ERU-01, -02, -03, -04 and -09 intersected a major gold-bearing low sulphidation epithermal system extending approximately 350m along strike as shown in Figure 2, a geological cross section. This system is characterized by quartz and sulphide veins/veinlets, mineralized hydrothermal breccia and silicification in dioritic rocks that is overprinted by a later more base metal-rich epithermal phase. It is concluded that the initial reconnaissance drilling tested the upper part of an extensive gold-bearing epithermal system. Further drilling at Rufina will be deeper to test for potential high-grade bonanza zones that the model predicts may be from 50 to 300m below.
Tom Larsen, CEO of Eloro commented: “We are now proceeding with deeper drilling on the Rufina zone. The reconnaissance drilling completed thus far is primarily in the hill side hence the deeper part of the system is potentially just below the level of the main access road where there are a number of artisanal workings. We have also retained the services of Rhind, a Peruvian-based consulting firm, to facilitate the permitting for the next phase of drilling on our other major targets including Victoria-Victoria South, Ccori Orcco, San Markito South and San Markito.”
Dr. Bill Pearson, P.Geo. Chief Technical Advisor for Eloro commented: “All of the reconnaissance drill holes intersected wide zones of mineralization and alteration with a significant number of gold intersections in different structures as shown in Figure 2. This initial drilling intersected the upper part of a classic “flower structure” hence further drilling needs to be deeper to test for potential bonanza-style gold mineralization. Dioritic rocks, which are the principal hosts for gold mineralization, were intersected in all but one (ERU-08) of the holes reported. These intrusives are marked by prominent magnetic anomalies. Our recently completed ground magnetic survey which extended coverage in the south part of the property has identified an additional 8 likely prospective intrusives bringing the total to 18 including those already confirmed in our major target areas. As shown in Figure 3, the principal target area covers 6 kilometres by 3 kilometres in a major tectonic block, the Rufina-Victoria Block, in the central-eastern part of the property.
The drill holes at Rufina were selected to provide complete sections across up to 800m strike length of the target zone to test the major NE and NW striking mineralized structures as well as north-south structures identified in surface geological mapping. Geological work shows that there is an extensive multi-phase low sulphidation epithermal gold mineralizing system on the La Victoria property centred around the Puca Fault that extends from Rufina north-eastwards to Victoria-Victoria South, a distance of at least 2.5 kilometres. Gold mineralization occurs in a variety of structural settings both parallel to the northeast trending Puca Fault as well as perpendicular along likely tear faults related to this structure. Mineralization has been identified vertically over 1 kilometre from elevation 3100 metres at Rufina to elevation 4200m at San Markito as well as along strike on different structures for up to 3+ kilometres. (see press release June 13, 2017).
Table 1: Summary of Significant Drilling Results, Rufina Zone Target,
La Victoria Gold Project, as of January 16, 2018
| Hole (i) | From
(m) | To
(m) | Core Length
(m) (ii) | Gold
(g/t) | Description (iii) |
| ERU-01 | 31.0 | 34.0 | 3.0 | 1.86 | Quartz vein & sulphide veinlets |
| incl. | 33.0 | 34.0 | 1.0 | 4.31 | Quartz vein |
| | 86.0 | 91.0 | 5.0 | 0.35 | Quartz vein & sulphide veinlets; includes 3.0m at 0.20% Cu |
| incl. | 86.0 | 89.0 | 3.0 | 0.41 |
| 192.3 | 193.4 | 1.1 | 0.50 | Quartz vein, boxworks of aspy and py veinlets, microdiorite dyke; 0.16% Cu |
| ERU-02 | 69.0 | 70.4 | 1.4 | 1.16 | Breccia with quartz clasts, aspy & py veinlets |
| 162.1 | 163.6 | 1.5 | 2.73 | Microdiorite dyke with veinlets & disseminated py & aspy |
| incl. | 162.8 | 163.6 | 0.8 | 5.05 |
| 173.6 | 177.5 | 3.9 | 0.57 | Microdiorite dyke with py & aspy veinlets & disseminations & quartz vein; includes 2.1m at 0.17% Cu |
| incl. | 175.4 | 177.5 | 2.1 | 1.06 |
| 207.0 | 214.4 | 7.4 | 3.46 | Quartz veins & veinlets, & diss. py & aspy, tectonic breccia |
| 207.0 | 210.4 | 3.4 | 7.31 | Quartz veins & veinlets, with patches & diss. py & aspy; includes 0.15% Cu |
| 219.0 | 220.0 | 1.0 | 0.58 | Sulphide veinlets |
| ERU-03 | 9.0 | 10.5 | 1.5 | 0.43 | Breccia with propylitized microdiorite clasts. |
| 92.5 | 93.5 | 1.0 | 2.82 | Quartz veinlets with py & aspy veins &veinlets |
| 245.1 | 245.8 | 0.7 | 1.03 | Breccia with quartz, aspy-py-gn veinlets & late calcite veinlets |
| 316.7 | 317.0 | 0.3 | 1.89 | Breccia with quartz-py-aspy-massive po veins |
| ERU-04 | 61.6 | 81.05 | 19.5 | 0.35 | Microdiorite with sulphide veins & veinlets |
| 68.2 | 70.3 | 2.1 | 0.91 | Microdiorite/sulphide veinlets |
| 74.7 | 78.1 | 3.4 | 0.68 | Sulphide veins & hydrothermal breccia; 0.26% Cu |
| | 145.6 | 150.1 | 4.5 | 2.10 | Moderate to strong stockwork& massive sulfides; 0.16% Cu |
| incl. | 146.5 | 148.1 | 1.6 | 4.31 | Massive sulphides, breccia; 0.30% Cu |
| 148.1 | 152.6 | 4.5 | 0.55 | Tectonic breccia, sulphide vein in argillized diorite |
| ERU-05 | 142.0 | 143.0 | 1.0 | 0.36 | Quartz and ca veinlets, disseminated py, aspy, po |
| | 148.5 | 149 | 0.5 | 0.32 | Py veinlets & iron oxides in fractures, chlorite & calcite |
| ERU-06 | | | | | Planned deeper hole – not yet drilled |
| ERU-07 | | | | | Assays pending |
| ERU-08 | 90.2 | 91.2 | 1.0 | 0.59 | Microdiorite with disseminated py & po. Fault 10 cm, clay |
| | 116.3 | 117.3 | 1.0 | 0.76 | Breccia and clay, py/ca veinlets., py/po in fractures; 0.12% Cu |
| | 134.4 | 135.4 | 1.0 | 0.32 | Aspy, spec, po, chlorite and quartz veinlets |
| | 202.5 | 202.9 | 0.4 | 1.54 | Breccia, massive aspy/po/py/specularite |
| ERU-09A(iv) | 149.8 | 154.8 | 5.0 | 0.66 | Py/aspy/po/quartz vein, fractures with iron oxides & phreatic breccia |
| incl. | 149.8 | 150.2 | 0.4 | 8.67 | Py/aspy/po/quartz vein, iron oxides and clay in fractures; high grade of 1% Cu. |
| 159.8 | 160.8 | 1.0 | 0.54 | Disseminated po/py/sericite & py/aspy, po & calcite veinlets |
| 171.0 | 171.4 | 0.4 | 2.89 | Massive py/aspy/po/quartz, breccias with iron oxides;0.14% Cu |
| 208.8 | 210.2 | 1.4 | 1.92 | Breccia & massive sulphide veins |
| incl. | 208.8 | 209.8 | 1.0 | 2.06 | Breccias & massive py/aspy/po veins |
| incl. | 209.8 | 210.2 | 0.4 | 1.59 | Massive py/aspy/po cut by quartz veins |
| 220.3 | 221.8 | 1.5 | 0.31 | Weakly argillized diorite with diss. py/po & calcite veinlets |
| 241.3 | 242.6 | 1.3 | 0.78 | Disseminated.py/po & calcite veinlets, massive sulphides and breccia; 0.13% Cu |
| incl. | 242.2 | 242.6 | 0.4 | 1.10 | Breccia and massive py/po & aspy veins |
| Notes: | (i) Diamond drill core for all holes is NTW size = 56.23mm |
| | (ii) True width is equal to approximately 70%-75% of core length |
| | (iii) Abbreviations: py=pyrite, aspy=arsenopyrite, po=pyrrhotite, gn=galena |
| | (iv) Hole ERU-09 was stopped at 62.5m and re-drilled near the same collar as ERU-09A |
Table 2: Collar coordinates and dip/azimuth of the drill holes of January 2, 2018
| Hole No. | Target | UTM | Elev. | Length | Az | Dip | Status |
| | | Easting | Northing | (i) | Completed | (i) | (i) | |
| ERU-01 | Rufina | 172727 | 9080245 | 3338 | 311.89 | 240 | -45 | Assays Received |
| ERU-02 | Rufina | 172727 | 9080245 | 3338 | 234.10 | 270 | -50 | Assays Received |
| ERU-03 | Rufina | 172730 | 9080246 | 3338 | 353.70 | 60 | -50 | Assays Received |
| ERU-04 | Rufina | 172641 | 9080169 | 3299 | 246.05 | 240 | -50 | Assays Received |
| ERU-05 | Rufina | 172600 | 9080252 | 3352 | 190.00 | 270 | -50 | Assays Received |
| ERU-06 | Rufina | 172527 | 9080243 | 3358 | | 60 | -50 | Planned |
| ERU-07 | Rufina | 172660 | 9080325 | 3366 | 287.70 | 60 | -50 | Assays Pending |
| ERU-08 | Rufina | 172799 | 9080407 | 3328 | 284.35 | 60 | -50 | Assays Received |
| ERU-09 | Rufina | 172349 | 9080038 | 3294 | 353.20 | 60 | -50 | Assays Received |
| Totals | | | | | 2.260.99 | | | |
| (i) | All measurements are in metres except Azimuth (Az) and Dip, which are measured in degrees. |
Additional Work in Progress
Ground Magnetic Survey – Southern Claims
In October 2017, Real Eagle Explorations E.I.R.L. submitted their final report for the 2017 magnetic survey for the new claims south of Rufina 2, east and west of the town of Huandoval. The survey includes 231.1 line-km of new magnetic data that have been merged with the existing data from 2010 to produce the detailed total magnetic intensity map shown in Figure 3. Dr. Chris Hale, P.Geo., Chief Geophysicist for Eloro concludes that the magnetic data show a number of additional anomalies that indicate potential intrusives in the southwestern part of the map. These appear to be associated with the south-western extension of the Puca Fault and they occur at the margin of a clear zone of magnetic susceptibility depletion. Overall, the magnetics surveys have identified 18 likely prospective intrusives in including those already confirmed in our major target areas. As shown in Figure 3, the principal target area covers 6 kilometres by 3 kilometres in a major tectonic block, the Rufina-Victoria Block, in the central and eastern part of the property. The San Markito and Southern Blocks have a different magnetic signature and are likely separate major tectonic blocks from the Rufina-Victoria Block.
The intrusives in the Victoria-Victoria South, Ccori Orcco, San Markito South and San Markito will be tested in the next drill program. The highly prospective targets will be explored by detailed geological mapping, prospecting and sampling later in 2018. The proximity of these targets to the Puca Fault and similarity to the structures now being drill tested on the Rufina target suggest that there is good potential to outline addition drill targets once further ground follow-up is completed.
Permitting
Diamond drilling program is moving forward. Technical field work for the Certificado de Inexistencia de Restos Arqueologicos (CIRA) is completed and the final report has been submitted. It is expected that the Ministry of Culture field review will take place in January 2018 with the permit to be received by the end of February 2018." data-reactid="43">Permitting for the 2018 Phase II Diamond drilling program is moving forward. Technical field work for the Certificado de Inexistencia de Restos Arqueologicos (CIRA) is completed and the final report has been submitted. It is expected that the Ministry of Culture field review will take place in January 2018 with the permit to be received by the end of February 2018.
Rhind, a Lima-based environmental consulting company, has been retained to prepare a modification to the Declaracion de Impacto Ambiental (DIA) to drill within the Victoria-Victoria South, Ccori Orcco and San Markito South target areas. This modification is required in order to move eight (8) of the original ten (10) San Markito platforms to the new target zones with drilling expected to be permitted by the end of March 2018. The field work for the modified DIA has been completed. In addition, application is being made to move several platforms in the Rufina target to facilitate deeper drilling of the major epithermal system there.
A more detailed environmental study (Estudio de Impacto Ambiental) with Rhind is in progress to permit up to 100 additional drill pads for June 2018 in the Rufina, San Markito, San Markito South, Victoria-Victoria South and Ccori Orcco target areas. The first phase of technical field work has been carried out in December 2017. The second phase will commence in March 2018. As part of the permitting process, presentations will be made in the communities of Pallasca, Huacaschuque and Huandoval in March 2018.
Agreement with EHR Resources
Further to Eloro’s news release issued on December 20, 2017, and pursuant to the La Victoria Option and Joint Venture Agreement entered into between Eloro and EHR Resources Limited (“EHR”), by mutual agreement Eloro and EHR have designated February 20, 2018 as the date by which EHR would be required to notify Eloro and proceed with the Stage 2 Earn-in Period, whereby EHR could acquire an additional 15% interest in La Victoria by spending an additional $3 million on exploration on the project by July 31, 2018. EHR’s Peruvian subsidiary currently holds a 10% interest in La Victoria, with Eloro’s Peruvian subsidiary owning a 90% interest.
Qualified Person
Dr. Bill Pearson, P.Geo., a Qualified Person in the context of National Instrument 43-101 has reviewed and approved the technical content of this news release.
About Eloro Resources Ltd.
Eloro is an exploration and mine development company with a portfolio of gold and base-metal properties in Peru and Quebec. Eloro owns a 90% interest in the La Victoria Gold/Silver Project, located in the North-Central Mineral Belt of Peru some 50 km south of Barrick's Lagunas Norte Gold Mine and Tahoe's La Arena Gold Mine. The Property consists of eight mining concessions and eight mining claims encompassing approximately 89 square kilometres. The Property has good infrastructure with access to road, water and electricity and is located at an altitude that ranges from 3,100 m to 4,200 m above sea level.
For further information please contact Jorge Estepa, Vice-President of Eloro Resources Ltd. at (416) 868-9168.
Information in this news release may contain forward-looking information. Statements containing forward-looking information express, as at the date of this news release, the Corporation's plans, estimates, forecasts, projections, expectations, or beliefs as to future events or results and are believed to be reasonable based on information currently available to the Corporation. There can be no assurance that forward-looking statements will prove to be accurate. Actual results and future events could differ materially from those anticipated in such statements. Readers should not place undue reliance on forward-looking information.
Neither the TSXV, CSE nor its Regulation Services Provider (as that term is defined in the policies of the TSXV or CSE) accepts responsibility for the adequacy or accuracy of this release.
Figure 1: Plan map showing locations of Diamond drill holes completed along with hole traces on the Rufina target zone.
http://www.globenewswire.com/NewsRoom/AttachmentNg/34d839aa-984c-44fa-89fd-80ee083dc702
Figure 2: Geological Cross Section of Diamond Drilling, Rufina
http://www.globenewswire.com/NewsRoom/AttachmentNg/d86d8f6a-f8fc-4203-91c7-a22fc3647882
Figure 3: Total magnetic intensity merged from the 2017 and 2010 magnetic data has outlined 16 likely prospective intrusives including those already confirmed in our major target areas. The principal target area covers 6 kilometres by 3 kilometres in a major tectonic block, the Rufina-Victoria Block, in the central and eastern part of the property. The San Markito and Southern Blocks have a different magnetic signature and are separate major tectonic blocks from the Rufina-Victoria Block.
http://www.globenewswire.com/NewsRoom/AttachmentNg/f591439d-f395-43bf-95c4-15afac6d5817