Project Name

Tonnes

(Mt)

Grade

(g/t Au)

Contained Metal (Koz

Au)

Gruyere1 (2015) (0.7 g/t)

137.81

1.24

5,512

Measured

1.45

1.43

67

Indicated

86.09

1.21

3,337

Inferred

50.27

1.30

2,108

Central Bore2 (2013) (1.0 g/t)

0.81

7.7

201

Measured

0.043

26.6

36.7

Indicated

0.43

8.7

119

Inferred

0.34

4.1

45

Attila Trend3 (2012) (0.5 g/t)

25.53

1.3

1,060

Measured

8.38

1.4

389

Indicated

9.36

1.2

373

Inferred

7.79

1.2

298

Total

164.15

1.3

6,773

Criteria

JORC Code explanation

Commentary

Sampling

techniques

Nature and quality of sampling (eg cut channels, random chips, or specific specialised industry

standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Sampling

techniques

Include reference to measures taken to ensure sample representation and the appropriate

calibration of any measurement tools or systems used.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Sampling

techniques

Aspects of the determination of mineralisation that are Material to the Public Report.

In cases where 'industry standard' work has been done this would be relatively simple (eg 'reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay'). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (eg submarine nodules) may warrant disclosure of detailed information.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Drilling techniques

Drill type (eg core, reverse circulation, open‐hole hammer, rotary air blast, auger, Bangka, sonic, etc)

and details (eg core diameter, triple or standard tube, depth of Diamond tails, face‐sampling bit or other type, whether core is oriented and if so, by what method, etc).

A Diamond drilling rig operated by Terra Drilling Pty Ltd collected the Diamond core as PQ, HQ and NQ core size

in this drill hole. The drill core diameter at the intersection described is NQ.

Drill sample

recovery

Method of recording and assessing core and chip sample recoveries and results assessed.

All Diamond core collected is dry. Drilling utilised 'triple‐tube" barrels in the more oxidised and friable rocks in

the weathered zones at the top of the drilling profile which ensures maximum possible core recovery is achieved. Drill operators measure core recoveries for every drill run completed using a 3 or 6 metre core barrel. The core recovered is physically measured by tape measure and the length recovered is recorded for every 3 or 6 metre "run". Core recovery can be calculated as a percentage recovery. Almost 100% recoveries were achieved.

Drill sample

recovery

Measures taken to maximise sample recovery and ensure representative nature of the samples.

Triple tube drilling is employed through the weathered zone to ensure maximum core recovery. Diamond drilling

collects uncontaminated fresh core samples which are cleaned at the drill site to remove drilling fluids and cuttings to present clean core for logging and sampling.

Drill sample

recovery

Whether a relationship exists between sample recovery and grade and whether sample bias may

have occurred due to preferential loss/gain of fine/coarse material.

There is no material loss of material reported in any of the Diamond core.

Logging

Whether core and chip samples have been geologically and geotechnically logged to a level of detail

to support appropriate Mineral Resource estimation, mining studies and metallurgical studies.

All drill cores will be geologically logged by Gold Road geologists, using the Gold Road logging scheme.

Logging

Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc)

photography.

Logging of drill core records lithology, mineralogy, mineralisation, weathering, colour and other features of the

samples, and structural information from oriented drill core. All samples are stored in core trays. Hand‐held XRF measurements are taken during logging to assist in lithological determination. All core is photographed in the cores trays, with individual photographs taken of each tray both dry, and wet, and photos uploaded to the GOR server database.

Logging

The total length and percentage of the relevant intersections logged

The entire drill hole will be logged in full on completion of drilling

Sub‐sampling

techniques and

sample preparation

If core, whether cut or sawn and whether quarter, half or all core taken.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Sub‐sampling

techniques and

sample preparation

If non‐core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry.

NA

Sub‐sampling

techniques and

sample preparation

For all sample types, the nature, quality and appropriateness of the sample preparation technique.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Criteria

JORC Code explanation

Commentary

Quality control procedures adopted for all sub‐sampling stages to maximise representation of

samples.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Measures taken to ensure that the sampling is representative of the in situ material collected,

including for instance results for field duplicate/second‐half sampling.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Whether sample sizes are appropriate to the grain size of the material being sampled.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Quality of assay

data and laboratory tests

The nature, quality and appropriateness of the assaying and laboratory procedures used and

whether the technique is considered partial or total.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Quality of assay

data and laboratory tests

For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in

determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc.

Calibration of the hand‐held XRF tools is applied at start‐up. XRF results are only used for indicative purposes of

lithogeochemistry and alteration to aid logging and subsequent interpretation.

Quality of assay

data and laboratory tests

Nature of quality control procedures adopted (eg standards, blanks, duplicates, external laboratory

checks) and whether acceptable levels of accuracy (ie lack of bias) and precision have been established.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Verification of

sampling and

assaying

The verification of significant intersections by either independent or alternative company personnel.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Verification of

sampling and

assaying

The use of twinned holes.

Twin holes were not employed during this part of the programme.

Verification of

sampling and

assaying

Documentation of primary data, data entry procedures, data verification, data storage (physical and

electronic) protocols.

All field logging will be carried out on Toughbooks using LogChief. Logging data is submitted electronically to the

Database Geologist in the Perth office. Assay files are received electronically from the Laboratory. All data is stored in a Datashed/SQL database system, and maintained by the GOR Database Manager.

Verification of

sampling and

assaying

Discuss any adjustment to assay data.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Location of data

points

Accuracy and quality of surveys used to locate drill holes (collar and down‐hole surveys), trenches,

mine workings and other locations used in Mineral Resource estimation.

The drill hole location was surveyed in by a qualified surveyor using DGPS to an accuracy of less than 1m in

Northing and Easting. The drill hole collar will be picked up by a Qualified Surveyor using DGPS on completion. The drill rig mast was set up using a clinometer. Drillers use an electronic single‐shot camera to take dip and azimuth readings inside the stainless steel rods, at 50m intervals. A final survey using an electronic multishot down‐hole survey device is also completed for all Diamond holes on completion of drilling.

Follow‐up down‐hole directional surveying using North‐seeking Gyroscopic tools will be completed by an independent service provider (ABIMS Pty Ltd)

Location of data

points

Specification of the grid system used.

Grid projection is GDA94, Zone 51.

Location of data

points

Quality and adequacy of topographic control.

The current elevation is to less than 1m accuracy.

Data spacing and

distribution

Data spacing for reporting of Exploration Results.

NA - this drill hole is approximately 650 meters down dip of the next closest hole

Data spacing and

distribution

Whether the data spacing and distribution is sufficient to establish the degree of geological and

grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied.

Too early to consider any relationship to Mineral Resource estimation.

Data spacing and

distribution

Whether sample compositing has been applied.

No compositing has been employed in the reported programme.

Orientation of data

in relation to

geological structure

Whether the orientation of sampling achieves unbiased sampling of possible structures and the

extent to which this is known, considering the deposit type.

The orientation of the drill holes is interpreted to be close to perpendicular to the principal orientation of the

Gruyere Porphyry which hosts the mineralisation of the Gruyere Deposit.

Orientation of data

in relation to

geological structure

If the relationship between the drilling orientation and the orientation of key mineralised structures

is considered to have introduced a sampling bias, this should be assessed and reported if material.

Logging has not yet been completed.

Sample security

The measures taken to ensure sample security.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Audits or reviews

The results of any audits or reviews of sampling techniques and data.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Criteria

JORC Code explanation

Commentary

Mineral tenement

and land tenure status

Type, reference name/number, location and ownership including agreements or material issues with

third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings.

The Diamond drilling occurred within tenement E38/2362, which is fully owned by Gold Road Resources Ltd.

The tenement is located on the Yamarna Pastoral Lease, which is owned and managed by Gold Road Resources

Ltd.

Tenement E38/2362 is located inside the Yilka Native Title Claim WC2008/005, registered on 6 August 2009. The

2004 "Yamarna Project Agreement" between Gold Road and the Cosmo Newberry Aboriginal Corporation govern the exploration activities respectively inside the Pastoral Lease. Aspects of these agreements are currently under review.

Mineral tenement

and land tenure status

The security of the tenure held at the time of reporting along with any known impediments to

obtaining a licence to operate in the area.

The tenement is in good standing with the WA DMP.

Exploration done by

other parties

Acknowledgment and appraisal of exploration by other parties.

No previous exploration has been completed on this prospect by other parties.

Geology

Deposit type, geological setting and style of mineralisation.

The target Gruyere Prospect comprises of a narrow to wide felsic intrusive dyke (Gruyere Porphyry) measuring

approximately 35 to 190 metres in width and striking over a current known length of 2,200 metres, and a

maximum known depth of 1,110 metres below surface. The Gruyere Intrusive dips steeply (65‐80 degrees) to the north east. A sequence of intermediate volcanic and volcaniclastic rocks define the stratigraphy to the west of the Intrusive and mafic volcanics (basalt) occur to the east of the Intrusive.

Mineralisation is confined ubiquitously to the Gruyere Intrusive and appears to be associated with pervasive

overprinting albite‐sericite‐chlorite‐pyrite alteration which has obliterated the primary texture of the rock. Minor fine quartz‐carbonate veining occurs throughout. Sulphide assemblages include pyrite‐pyrrhotite‐arsenopyrite in varying amounts. Free gold is observed commonly associated in alteration at vein margins, close to coarse arsenopyrite clusters, and in quartz veins, The Gruyere Prospect is situated in the north end of the regional camp‐scale South Dorothy Hills Target identified by Gold Road Resources during its Regional Targeting campaign completed in early 2013. The Gruyere target comprises a coincident structural‐geochemical target within a major regional‐scale structural corridor associated with the Dorothy Hills Shear Zone. This zone occurs within the Dorothy Hills Greenstone Belt at Yamarna in the eastern part of the Archaean Yilgarn Craton. The Dorothy Hills Greenstone is the most easterly known occurrence of outcropping to sub‐cropping greenstone in the Yilgarn province of Western Australia.

Drill hole

Information

A summary of all information material to the understanding of the exploration results including a

tabulation of the following information for all Material drill holes:

 easting and northing of the drill hole collar

 elevation or RL (Reduced Level - elevation above sea level in metres) of the drill hole collar

 dip and azimuth of the hole

 down hole length and interception depth

 hole length.

If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case.

Refer to Figure 2 cross section and Figure 3 Plan

Collar Coordinates detailed in Table 1

No assays reported

Data aggregation

methods

In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade

truncations (eg cutting of high grades) and cut‐off grades are usually Material and should be stated.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Criteria

JORC Code explanation

Commentary

Where aggregate intercepts incorporate short lengths of high grade results and longer lengths of

low grade results, the procedure used for such aggregation should be stated and some typical

examples of such aggregations should be shown in detail.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

The assumptions used for any reporting of metal equivalent values should be clearly stated.

No metal equivalent values are used.

Relationship

between mineralisation widths and intercept lengths

These relationships are particularly important in the reporting of Exploration Results.

If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported. If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (eg 'down hole length, true width not known').

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Diagrams

Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any

significant discovery being reported. These should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Balanced reporting

Where comprehensive reporting of all Exploration Results is not practicable, representative

reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results.

No sampling has been completed on the porphyry intersection so far. No assays are reported in this release.

Other substantive

exploration data

Other exploration data, if meaningful and material, should be reported including (but not limited

to): geological observations; geophysical survey results; geochemical survey results; bulk samples -

size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances.

Drill hole location data are plotted on the interpreted cross section (Figure 1).

Further work

The nature and scale of planned further work (eg tests for lateral extensions or depth extensions or

large‐scale step‐out drilling).

Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive.

The drill hole 15EIS001 is still in progress and will drill to a planned end of hole depth of 2,000 metres. At the time

of reporting it was at a depth of 1,416 metres down hole, and had intersected 26 metres of the Gruyere Porphyry.