Highlights:

• Diamond Drill Hole (DDH) PL-010-14 intersected 2.01% Li2O over 60.70 metre (m) from 168.3m to 229 m;
• DDH PL-010-14 includes a 22 m wide lithium zone (Lower Intermediate [LIZ]) averaging 2.46% Li2O from 171 to 193 m;
• DDH PL-010-14  and DDH PL-008-14  increases the deposits strike length from 265m to 400m; and
• Mineralization remains open to depth and along strike to the northwest and southeast.

(1)    The intervals in Table I are drill intersection widths. There is currently insufficient data to determine the true thickness of the pegmatite.

(2)   Li20 content in the CIZ is predominantly associated with lithian micas and to a lesser extent (if any) in spodumene. Li2O content in the Li enriched zones is predominantly associated with spodumene.

n/a = Not applicable

The Upper Intermediate (UIZ), Central Intermediate (CIZ) and Lower Intermediate Zones (LIZ) were previously described in the July 2, 2013 Press Release.  Zones of sodic aplite are present in all holes and vary in width from tens of centimetres to several metres, and contain significant concentrations of Ta, Rb and Cs. 

Noteworthy observations are that the NNE (footwall) boundary with the metasediments is consistent and predictable while the SSW (hanging wall) contact with the granite is somewhat erratic and complicated by granitic blocks and rafts and appears to have been variably affected (metasomatized) by the pegmatite intrusion event(s).  The mineralized pegmatite remains open along strike to the WNW and ESE, and at depth.  Granitic blocks/rafts mapped on surface appear to diminish with depth. 

"These drill holes were planned with an objective of potentially increasing the strike length of the deposit. The September 24, 2014 press release which positively displayed that the pegmatite's grade x thickness is persisting with depth, coupled with the results from this press release have increased the overall geometry and should result in a tonnage increase to the maiden resource estimate", commented Trevor R. Walker, President of HLM. "We are extremely pleased with the overall results from the Phase II Diamond drill program and can conclude that the Pakeagama Lake pegmatite is robust with analogous features to the high grade, multi-element, and large tonnage of the prolific Tanco pegmatite in southeastern Manitoba and the Greenbushes pegmatite in Western Australia".

Table II- Collar Locations for Diamond Drill Hole (DDH) 

The Company also announces that it has granted incentive stock options totalling 450,000 to a consultant. The options are set for a period of five years, expiring on November 11, 2019. The options are priced at $0.135 and are subject to regulatory approval.

The Company also announces that by written consent of the shareholders on September 25, 2014, the resolution proposed was duly passed for the issuance of 2,500,000 common shares relating to a settlement of $200,000 of debt due to a company owned by one "non-arm's length" individual. The common shares were a part of an aggregate 3,991,000 shares for debt settlement that have now been approved. Following the foregoing issuance of shares in settlement of debt, the Company will have 90,807,595 shares outstanding.

Due Diligence

All scientific and technical information in this release has been reviewed and approved by Peter J. Vanstone, P.Geo., the qualified person (QP) under the definitions established by National Instrument 43-101.  Under HLM's QA/QC procedures, the Diamond drill contract specified NQ-sized drill core providing a 47.6 mm diameter sample.  The drill holes were oriented perpendicular to the strike of the pegmatite and drilled continuously across it.  Sample security and chain of custody started with the removal of core from the core tube and boxing of drill core at the drill site.  The boxed core remained under the custody of the drill contractor until it was transported from the drill to the secure on-site Core Shack facility by either the drill contractor or one of the Company's designated personnel.  At the on-site Core Shack, core boxes were opened and inspected to ensure correct boxing and labelling of the core by the drill contractor, photographed and then re-closed.  The core was stored securely until moved into the Core Shack for processing. The company geologists logged the core, and then marked and tagged it for sampling and splitting.  Each core sample was assigned a tag with a unique identifying number.  Sample lengths are typically one meter, but can be less depending on zone mineralogy and boundaries.  The Core was then re-closed and shipped to the company's off-site core splitting facility in Sudbury, Ontario.  Core marked for splitting was cut using a Diamond core saw with a mounted jig to assure the core was cut lengthwise into equal halves.  Half of the core was sent to an analytical laboratory for quantitative analysis of select elements.  The remaining half of the core is retained and incorporated into HLM's secure, off-site core library.

All samples were assayed by AcmeLabs' (A Bureau Veritas Group Company), an ISO accredited laboratory in Vancouver, British Columbia. Sample blanks along with tantalum, lithium, rubidium and cesium certified reference material was routinely inserted into the sample stream in accordance with industry recommended practices. Field duplicate samples were also taken in accordance with industry recommended practices.

About the PAK Rare Metals Project

The PAK Rare Metals Project lies close to the boundary between two geological sub-provinces of the western Superior geologic province in northwestern Ontario and hosts a rare metals pegmatite deposit. The deposit is an LCT (lithium- cesium- tantalum) classified pegmatite. These rare types of deposits have been the principal source of hard rock lithium, tantalum, rubidium and cesium ores mined in the world.

HLM is actively exploring its 100% owned and optioned project which contains the Pakeagama Lake pegmatite. The deposit is one of the highest grade deposits in North America which has a current Inferred Resource of 6.89 million tonnes of 1.86% Li2O Eq. which has a technical/ceramic grade spodumene with low inherent iron (below 0.1% Fe2O3). Within the deposit, the pegmatite uniquely hosts an Upper Intermediate Zone of 1.17million tonnes grading 3.44% Li2O. The pegmatite has a 265m strike length with an estimated width varying from 45 to 125m with a sub-vertical orientation. The resource remains open to depth and along strike to the northwest and southeast. A 9-hole, 1,500m Phase II Diamond drill program was completed in late March 2014 and have not yet been considered in a resource calculation.

About Houston Lake Mining Inc.
HLM's goal is to become a fully integrated lithium and tantalum producer through the development of the PAK Rare Metals Project in Ontario, Canada. The Company's strategy is to take advantage of low-Fe ceramics/glass market as well as the global shift towards electric/hybrid vehicles and high quality consumer electronics by becoming a raw material supplier of the elements required for the pursuit of sustainable energy and other applications in ceramics/glass, high-tech electronics and metal alloys. Combined, HLM's Board of Directors and Management have over 300 years of finance, exploration and mining experience to help to facilitate the Company's goal.

HLM has a total of 90,807,595 common shares issued and outstanding. For additional information on HLM, please visit www.houstonlakemining.com

Company Contact Information

Trevor R. Walker, President                                                              Henry J. Kloepper, CEO        

2736 Belisle Drive                                                                              T. +001 416.520.0187

Val Caron, ON.

P3N 1B3 CANADA

T. +001 705.897.7622

F. +001 705.897.7618