VANCOUVER , July 23, 2014 /CNW/ - Mirasol Resources Ltd. (TSX-V: MRZ, Frankfurt: M8R)
-
At the AGZ (Atlas Gold Zone) prospect surface rock chip sampling has
outlined an 800 by 500 m area hosting multiple gold-anomalous
quartz-alunite alteration trends, with 55 of 473 rock chips assaying
between 1.0 and 50.3 g/t gold.
-
Detailed re-sampling of existing AGZ trenches which lie within the area
of the rock chip gold anomaly returned best length-weighted average
channel samples of:
-
8.4 m at 1.85 g/t Au and 0.5 g/t Ag
-
11.3 m at 1.32 g/t Au and 7.3 g/t Ag
-
14.9 m at 1.67 g/t Au and 0.6 g/t Ag
-
Highest individual channel samples from the re-sampled trenches include
1.2 m at 8.85 g/t Au and 45.8 g/t Ag, and 1.0 m at 5.63 g/t Au and 5.13
g/t Ag.
Mirasol Resources recently reported that it had outlined an 800 by 500 m
zone of anomalous gold and silver mineralization in rock chip float and
subcrop samples at its 100%-owned Atlas AGZ prospect (Figure 1; and see news release of July 18, 2014 ). Of the 473 rock chip samples
collected here, 55 have assayed between 1.0 to 50.3 g/t Au. These
higher-grade samples are interpreted to define a series of
northwest-trending quartz-alunite alteration zones with vuggy silica
and hydrothermal breccias, hosted by andesitic lava flows, or an
andesitic flow dome.
The gold - silver trends are spatially associated with a 1 km long,
opened-ended highly resistive geophysical anomaly defined in Mirasol's
recent IP survey at Atlas. These resistive anomalies may represent
hydrothermal feeder zones or buried flow domes. Anomalous rock chip
samples with assays in the range 0.1 to 30.7 g/t Au and with Ag assays
up to 56.9 g/t occur on the margin, or over the top, of the buried
resistive anomalies potentially representing geochemical leakage from
the covered geophysical features.
Mirasol also recently completed a detailed re-mapping and channel
re-sampling program (Figure 2) over the existing trenches at the AGZ prospect to better understand
the mineralization in the trenches and its relationship to the Au and
Ag-bearing quartz-alunite zones at surface. The best length-weighted
average trench channel results (Table 1) from this season's sampling include 11.3 m at 1.32 g/t Au and 7.3 g/t
Ag, and 14.9 m at 1.67 g/t Au and 0.6 g/t Ag (at a 0.1 g/t Au
equivalent cut-off). Higher-grade channel intervals (at a 0.5 g/t Au
equivalent cut-off) include 2 m at 4.91 g/t Au and 3.0 g/t Ag, and 2.2
m at 5.08 g/t Au and 26.0 g/t Ag.
The gold - silver mineralization in the AGZ trenches correlates to a
series of vuggy silica structures (Photo Gallery A, B, C) and alunite matrix hydrothermal breccias (Photo Gallery D, E, F) with quartz-alunite alteration halos. These structures and breccias
are best developed over a 70 m section of Trench 2, with individual
vuggy silica structures ranging up to 4 m wide, while the hydrothermal
alunite matrix breccias are exposed for intervals of up to 23 m along
the trench wall (true width unknown at this stage). Mineralized zones
in the trenches show a strong correlation with the surface
quartz-alunite trends. The higher-grade surface rock chip trends,
including areas with rock chip assays up to 30.7 g/t Au and 42.3 g/t Ag
identified this season have not yet been trenched. This presents an
excellent opportunity to extend the mineralized zones.
The presence of abundant primary hypogene alunite and vuggy silica
alteration of the gold - silver host rock is consistent with a
high-sulphidation epithermal character to the AGZ mineralization. This
type of mineralization has produced both high-grade
structurally-controlled and open-pit bulk mineable gold-silver mines
elsewhere in the Miocene belt of Chile . All trench and surface rock
chip samples at the AGZ are strongly oxidized with no preserved
sulphide recorded. This suggests the potential for oxide-gold
mineralization at the project.
Mirasol's geologists are processing results from surface sampling,
re-mapping and channel re-sampling of the Atlas Silver Zone (ASZ)
trenches. These results will be reported once complete.
Mirasol's management are very pleased with the exploration outcomes of
the 2014 summer program and the Atlas project where three prospects;
the AGZ, ASZ and Pampa zone have now been identified and new quality
drill targets are beginning to emerge at the AGZ prospect.
Stephen Nano , President and CEO is the Qualified Person under NI 43-101
who has prepared and approves the technical content of this news
release.
Quality Assurance/Quality Control:
Exploration at the Atlas Project is supervised by Stephen C. Nano , who
is the Qualified Person under NI 43-101 and Timothy Heenan , Exploration
Manager. All technical information for the Company's projects is
obtained and reported under a formal quality assurance and quality
control (QA/QC) program. All drill, rock chip and stream sediment
samples are collected under the supervision of Company geologists in
accordance with standard industry practice. Samples are dispatched via
transport to an ISO 9001:2000-accredited laboratory in Chile for
analysis. All drill, and rock chip samples are submitted to the
Laboratory with independently sourced, accredited standards and blanks
and where appropriate duplicate samples to facilitate monitoring of
laboratory performance. Certified Results are examined by an
independent qualified consultant to ensure laboratory performance meets
required standards.
Neither the TSX Venture Exchange nor its Regulation Services Provider
(as that term is defined in the policies of the TSX Venture Exchange)
accepts responsibility for the adequacy or accuracy of this release
SOURCE Mirasol Resources Ltd.