Vancouver, BC � December 1, 2011:  Kiska Metals Corporation (�Kiska" or "the Company�) reports final drill results from the Island Mountain prospect, Whistler Project, located 160 km northwest of Anchorage, Alaska. Results include hole IM11-040, which averaged 0.84g/t gold equivalent (0.53g/t gold, 3.55g/t silver and 0.13% copper) over 364 metres, including a higher grade interval that averages 1.05 g/t gold equivalent (0.62g/t gold, 6.36g/t silver, 0.17% copper) over 141 metres. All six of the final holes reported herein returned significant grades and widths of gold-copper mineralization, capping off a highly successful season of drilling at Island Mountain.

Hole IM11-040 was the first hole oriented in a north-south direction testing both geological and grade continuity. The hole intersected breccias and consistent gold-copper grades for almost its entire length. The other five holes were drilled on intermediate sections and to fill in a gap on section 7,750N, thereby providing drill coverage over the Breccia Zone on six 50-metre spaced, east-west sections.

�We are extremely pleased with the rapid progress of our drilling at Island Mountain where we have managed to grow the mineralized body in all dimensions and demonstrate consistently good gold and copper grades. Our drill density will allow us to conduct a thorough interpretation of the Breccia Zone and provide the knowledge to guide further expansion of the zone in 2012,� stated Mark Baknes, VP Exploration for Kiska Metals Corporation. �Our understanding of the Breccia Zone mineralization has enabled us to refine our exploration model. With this model and the success of our reconnaissance drill program we can see multiple high priority targets that we are anxious to drill test.�

Section 7,750N Hole IM11-036

IM11-036 was located 100 metres east of and on the same section as IM11-013, which returned a 252.0 metre interval averaging 0.71g/t gold, 2.6g/t silver and 0.15% copper. Hole IM11-036 returned a 74.0 metre interval averaging 0.98g/t gold, 0.51g/t silver and 0.03% copper on the eastern margin of the main breccia body. The drill results on section 7,750N now define a zone of consistent mineralization that measures approximately 300 metres east-west to a depth of 500 metres below surface. Plan maps and cross sections can be found at http://www.kiskametals.com/s/Whistler.asp?ReportID=405126 

Hole IM11-036 (Section 6,847,750 N, �7,750N�)

*Gold equivalent calculations do not take into account metallurgical recoveries and are based on in ground metal using metal prices of $990 per ounce gold, $15.40 per ounce silver and $2.91 per pound copper.
¹End of Hole � hole ended in mineralization

Section 7,700N Hole IM11-038, 041

IM11-038 and IM11-041 were -45 and -60 degree inclined holes, collared approximately 100 metres west of holes IM10-010 and 011. These holes were designed to test down dip continuity of breccia and gold bearing disseminated/vein pyrrhotite as well as fill in the gap between the strong mineralization defined on sections 7,650N and 7,750N. Hole IM11-038 intersected a strongly developed breccia zone 182 metres in length that averaged 0.50g/t gold, 2.94g/t silver and 0.14% copper (0.84g/t gold equivalent) including a higher grade, 124 metre long interval averaging 0.55g/t gold, 3.34g/t silver and 0.17% copper (0.95g/t gold equivalent). The lack of strong breccia mineralization in the more steeply inclined hole IM11-041 confirms that the south contact of the breccia has a steep northerly dip. This hole did encounter strong alteration and vein stockwork containing a broad zone of low grade gold-copper mineralization.

Hole IM11-038, 041 (Section 6,847,700 N, �7,700N�)

*Gold equivalent calculations do not take into account metallurgical recoveries and are based on in ground metal using metal prices of $990 per ounce gold, $15.40 per ounce silver and $2.91 per pound copper.
¹End of Hole � hole ended in mineralization

Section 7,800N Hole IM11-037, 039

Holes IM11-037 and IM11-039 were collared 100 metres apart to test for continuity of mineralization between the gold-copper zones defined on sections 7,750N and 7,850N. The most easterly hole, IM11-037, intersected breccia mineralization that returned 79 metres of 1.00g/t gold, 0.28g/t silver and 0.02% copper and deeper intervals of low grade disseminated/vein pyrrhotite-associated gold mineralization that remains open to the east. Hole IM11-039  drilled beneath hole IM11-037 intersecting broad zones of gold-copper breccia mineralization including 157 metres averaging 0.59g/t gold, 2.80g/t silver and 0.16% copper. The copper zone intersected in IM11-039 likely represents the continuation of copper-gold rich mineralization intersected on section 7,750N, 50 metres to the south. Follow up to hole IM11-039 will be a priority in 2012 since mineralization remains open down-dip and to the east.

Hole IM11-037, 039 (Section 6,847,800 N, �7,800N�)

*Gold equivalent calculations do not take into account metallurgical recoveries and are based on in ground metal using metal prices of $990 per ounce gold, $15.40 per ounce silver and $2.91 per pound copper.
¹End of Hole � hole ended in mineralization

Kiska has concluded the 2011 program at Island Mountain. All results have now been released from the 26 holes (9,537 metres) completed this year. The final three holes from Muddy Creek will be released before year end.

Qualified Person Statement

The content of this release has been reviewed by Mr. Mark Baknes, M.Sc., P. Geo., VP Exploration of Kiska Metals. Mr. Baknes is a Qualified Person as defined under the terms of National Instrument 43-101. Rock samples were prepared for assay at ALS Chemex Labs in Fairbanks, Alaska, and analyzed for multiple elements at ALS Chemex Labs in North Vancouver, British Columbia.

About Kiska Metals Corporation

Kiska Metals Corporation is a mineral exploration company focused on advancing the Whistler property, Alaska, a district-scale project with excellent exploration potential which includes the Whistler Deposit (a 2.25 M oz gold-equivalent indicated resource of 79.2 million tonnes averaging 0.51 g/t gold, 1.97 g/t silver and 0.17% copper and a 3.35 M oz. gold equivalent inferred resource of 145.8 million tonnes averaging 0.40 g/t gold, 1.75 g/t silver and 0.15% copper).  Kiska has renowned technical expertise and a quality exploration portfolio with numerous early stage exploration opportunities around the world, some held in partnership with a selection of the world�s largest and most successful gold and base metal producers.

On behalf of Kiska Metals Corporation

�Jason Weber�

Jason Weber, P.Geo., President & CEO

CAUTIONARY STATEMENT: No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein. This News Release includes certain "forward-looking statements". Other than statements of historical fact, all statements included in this release, including, without limitation, statements regarding future plans and objectives of Kiska Metals Corporation, are forward-looking statements that involve various risks and uncertainties. There can be no assurance that such statements will prove to be accurate, and actual results and future events could differ materially from those anticipated in such statements. Important factors that could cause actual results to differ materially from Kiska's expectations are the risks detailed herein and from time to time in the filings made by Kiska Metals Corporation with securities regulators. Those filings can be found on the Internet at http://www.sedar.com and http://www.sec.gov/edgar.