TORONTO, ONTARIO--(Marketwire - Sept. 14, 2011) - North American Palladium Ltd. ("NAP" or the "Company") (News - Market indicators)(NYSE Amex:PAL) today provided an update on the drill results from its 2011 exploration program at the Company's Lac des Iles ("LDI") palladium mine in Northern Ontario. These results (see Appendix) are the second tranche of drill results from the 2011 drill program at LDI. A previous update, provided on June 28, 2011, contained the initial results.

Highlights:

• Positive infill drill results in the Offset Zone, including 26 metres at 6.0 g/t Pd in hole 11-743 in the upper part of the zone;
  
  
• Surface drilling (holes 11-501 and 11-502) on the Offset Zone intersected significant mineralization close to the deepest limit of the current resource wireframe, supporting the exploration potential beyond the current resource wireframe; and
  
  
• Exploration drilling following the possible extension of the upper north Roby Zone encountered palladium mineralization that will be followed up by additional drilling.
  
  

"Exploration at LDI continues to deliver good results, and we have therefore increased our 2011 drill program from the 52,000-metre overall budget to 78,000 metres," said William J. Biggar, President and CEO.

NAP's 2011 exploration program at LDI is aimed at expanding the size of the Offset Zone, increasing the knowledge of the Offset Zone mineralization to facilitate more efficient mine planning, and identifying potential surface deposits. To date, in 2011 approximately 68,000 metres (182 holes) have been drilled on the LDI property. Underground drilling totals 28,363 metres (129 holes) and surface drilling totals 39,814 metres (53 holes). Due to logging and assaying delays, only approximately 70% of the assays are available at this time.

Available drill results are included in the Appendix of this news release. It is estimated true widths represent on average 70% of the reported lengths for surface drilling and on average 80% of the reported lengths for underground drilling. Elevations referred to in this news release are presented in the mine grid in Figure 1, and the drill locations are presented in Figure 2. 

Offset Zone Underground Definition Drilling

Underground drilling on the Offset Zone continued to define the deposit on a 15-metre drill pattern. This includes holes which were mostly completed in the upper sector of the Offset Zone, where production is scheduled to commence in early 2012 (see Figures 4 and 5). The holes were drilled on fan patterns from the Offset Zone ramp and the vast majority intersected the Offset Zone.

The following table includes some of the best new results from the underground in-fill drilling (see Figures 4 and 5). Some of the underground holes also intersected the Cowboy and Outlaw Zones, see the results in the Appendix.

The 11-OPX series underground holes (see results in Appendix) were drilled to test an area where an isolated lens of palladium mineralization had been detected in previous drilling. The zone was drilled and commercial palladium grades were intersected in holes 11-OP8 and 11-OP9. However, the drilling also confirmed the limited lateral extension of this mineralization.

Offset Zone Deep Surface Drilling

The surface deep drilling continued to target the Offset Zone at elevation below the 4650 mine level. The following partial results of hole 11-501 were released on June 28, 2011, with the first tranche of drilling:

Since then, complete assay results have been received for hole 11-501, which include:

Hole 11-502, also drilled at depth, encountered the following results:

These latest results continue to indicate continuity of the Offset Zone at depth.

Roby Zone Extensions Drilling

An underground exploration drilling campaign commenced during the second quarter to test the north and south lateral extensions of the Roby Zone. Hole 11-200 (see Figure 8) intersected a 26-metre long, low grade (2.1 g/t Pd) zone on the north side, with some sections showing enrichment (see results in Appendix).

Hole 11-055, from surface, also intersected the Roby Zone, with grades in the 3 – 4 g/t range (see results in Appendix). Additional drilling is in progress to continue the evaluation.

2011 LDI Surface Exploration: North VT Rim and Other Sectors

During the year, NAP continued to drill to identify new targets on the property (see Figures 2 and 3).

The north-east extension of the favorable rock formations hosting the Offset and Roby zones, called the North VT Rim, was drilled by 6 holes. Holes 11-061 to 11-065 were drilled in the north-central portion of the mine block intrusion, which had never been drilled before. These holes confirm the presence of narrow, high-grade mineralization over 1 kilometre along the north rim. This is an early-stage exploration target that will continue to be followed up in the coming years.

The Baker Zone, a historic known surface mineralized zone, and other targets in the south sector, were also drilled (see Figure 2). Received assay results indicate low palladium grades (approximately 2 g/t Pd) are present over several metres. Most of the assays are still pending (see results in Appendix). If the assay results provide encouragement, additional drilling will be conducted in different sectors.

The primary focus until the end of the year will be continued underground exploration at LDI targeting the Offset Zone, to better define the upper extension of the Offset Zone for mine planning, as well as testing the extension of the Offset Zone mineralization in all directions. The Roby Zone lateral north and south extensions will also continue to be drilled for evaluation.

Technical Information and Qualified Persons

The assay analyses performed during NAP's drill programs are subject to a formal quality assurance and quality control (QA/QC) program. Diamond drill core is logged and sampled on site and at the Company's exploration office in Thunder Bay with sample transport by the Company and Courtesy Courier to Activation Laboratories Ltd. (Thunder Bay and Ancaster), an independent accredited laboratory, for assay analysis. Check assay analyses are carried out by SGS Minerals Services (Toronto), a laboratory that is also independent of the Company. The Company's exploration team designed and executed the drilling program under the supervision of Mr. Michel Bouchard, P. Geo., Vice President, Exploration and Development, NAP, a Qualified Person as defined by National Instrument 43-101, who has reviewed and approved the content of this news release.

About North American Palladium

NAP is a Canadian precious metals company focused on growing its production of palladium and gold in mining-friendly jurisdictions. The Company's flagship mine, Lac des Iles, is one of the world's two primary palladium producers. NAP also owns and operates the Sleeping Giant gold mine located in the prolific Abitibi region of Quebec. The Company has extensive landholdings adjacent to both its Lac des Iles and Sleeping Giant mines, and a number of exploration projects. NAP trades on the NYSE Amex under the symbol PAL and on the TSX under the symbol PDL.

Cautionary Statement on Forward Looking Information

Certain information included in this press release, including any information as to our future exploration, financial or operating performance and other statements that express management's expectations or estimates of future performance, constitute 'forward-looking statements' within the meaning of the 'safe harbor' provisions of the United States Private Securities Litigation Reform Act of 1995 and Canadian securities laws. The words 'expect', 'believe', 'will', 'intend', 'estimate' and similar expressions identify forward-looking statements. Forward-looking statements are necessarily based upon a number of estimates and assumptions that, while considered reasonable by management, are inherently subject to significant business, economic and competitive uncertainties, risks and contingencies, including the possibility that drill programs will not yield the expected results, that operations at the Lac des Iles and Sleeping Giant mines may not proceed as planned, that Vezza and other properties can be successfully developed, and that metal prices, foreign exchange assumptions and operating costs may differ from management's expectations. The Company cautions the reader that such forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual financial results, performance or achievements of North American Palladium to be materially different from the Company's estimated future results, performance or achievements expressed or implied by those forward-looking statements and that the forward-looking statements are not guarantees of future performance. These statements are also based on certain factors and assumptions. For more details on these estimates, risks, assumptions and factors, see the Company's most recent Form 40-F/Annual Information Form on file with the U.S. Securities and Exchange Commission and Canadian provincial securities regulatory authorities. The Company disclaims any obligation to update or revise any forward-looking statements, whether as a result of new information, events or otherwise, except as expressly required by law. Readers are cautioned not to put undue reliance on these forward-looking statements.

To view the Appendix of tables associated with this release, please visit the following link: http://media3.marketwire.com/docs/914napappendix.pdf.                              

To view "Figure 1: Wireframe image of the Offset Zone mineralization & mine elevations," please visit the following link: http://media3.marketwire.com/docs/pdl914a.jpg.

To view "Figure 2: Surface plan of all 2011 drilling (year to date as at July 24, 2011)," please visit the following link: http://media3.marketwire.com/docs/pdl914b.jpg.

To view "Figure 3: All 2011 drill holes, section looking north," please visit the following link: http://media3.marketwire.com/docs/pdl914c.jpg.

To view "Figure 4: Underground definition drilling: 11-700 hole series in section view, looking east," please visit the following link: http://media3.marketwire.com/docs/pdl914d.jpg.

To view "Figure 5: Section view of certain holes of the 11-700 series, looking north," please visit the following link: http://media3.marketwire.com/docs/pdl914e.jpg.

To view "Figure 6: Section view of the 11-501 and 11-502 holes, looking north," please visit the following link: http://media3.marketwire.com/docs/pdl914f.jpg.

To view "Figure 7: Section view of the11-502 hole, looking north," please visit the following link: http://media3.marketwire.com/docs/pdl914g.jpg.

To view "Figure 8: Section view of hole 11-200, looking north," please visit the following link: http://media3.marketwire.com/docs/pdl914h.jpg.