|
|
Silvercorp Metals Inc. (TSX:SVM - News)(NYSE:SVM - News) ("Silvercorp") is pleased to report drill results on
the S7-1 Vein, part of its 2010 underground diamond drilling program at the
Ying Mine, Ying Mining District, Henan Province, China. The 2010 underground
drill program at the Ying Mine intended to investigate down dip extensions of
several major production veins (e.g. S16W, S14, S7, S21, and S8) and to drill
laterally to define new veins or under-explored veins near these major
production veins. Due to delays in excavating drill pads at the 260 metre (m) elevation level tunnel (lowest level in the
mine), drilling down dip was limited. The Company instead focused on drilling
laterally on those previously known but less explored veins from tunnels
above the 260m elevation level.
The 2010 drill program was successful in
further defining the S7-1 vein (a branch of the S7 vein), increasing its
known extension from 1,400 to 2,000 metres in
strike length, and to a depth of 620 metres down
dip, to the 200m elevation level. Numerous high grade pockets were discovered
in the S7-1 vein which will be subject to further detailed in-fill drilling
in 2011. It is expected that these high grade pockets will add
resource/reserve that will either extend the Ying mine life or increase
current mining capacity as these pockets are close to the existing mining
tunnels and can be quickly developed into mining stopes.
A total of 21,199 metres
in 80 holes with a drilling spacing of 400 by 200 metres
to 200 by 100 metres were drilled on the S7-1 vein
during the 2010 drilling program. Thirty six holes hit significant
mineralization with their assay results listed in Table 1. The rest of the
holes intercepted the S7-1 structure without significant mineralization and
are not listed. The highlights of the drilling results of the S7-1 vein are
as follows:
-- Hole ZK9B06 intersected a 14.62 metre interval grading 363 g/t Ag, 2.45%
Pb, and 4.80% Zn at the 428m elevation level, including 1.5 metre of
1,960 g/t Ag, 13.25% Pb, and 27.06% Zn;
-- Hole ZK4010 intersected 3.28 metres grading 464 g/t Ag, 7.93% Pb, and
1.18% Zn at the 421m elevation level, including 0.45 metres of massive
galena that contains 2,331 g/t Ag, 50.01% Pb, and 6.21% Zn;
-- Hole ZK4012 intersected 1.63 metres grading 629 g/t Ag, 12.13% Pb, and
0.95% Zn at the 330m elevation level, including 0.40 metres of massive
galena grading 1,405 g/t Ag, 48.34% Pb, and 3.57% Zn;
-- Hole ZK4B11 intersected 0.35 metres grading 1,912 g/t Ag, 40.60% Pb, and
1.91% Zn at the 365m elevation level;
-- Hole ZK5507 intersected 0.27 metres grading 1,397 g/t Ag, 47.29% Pb, and
3.19% Zn at the 309m elevation level; and
-- Hole ZK6308 intercepted 2.30 metres grading 484 g/t Ag, 5.64% Pb, and
1.58% Zn at the 435m elevation level, including 0.25 metres grading
2,179 g/t Ag, 48.58% Pb, and 13.11% Zn.
Silvercorp has planned 20,000 metres
of in-fill underground diamond drilling on the S7-1 vein in 2011 at a drill
spacing of 100 by 100 metres to further define
several newly discovered high grade pockets and to further test its down dip
extension.
Table 1: Drill Hole Assay Results:
---------------------------------------------------------------------------
Distance
to
Intersection South of
Drill ---------------- Interval Elevation Ag Pb Zn CM103
Hole From (m) To (m) (m) (m) (g/t) (%) (%) (m)
---------------------------------------------------------------------------
ZK1011 254.12 254.42 0.30 404 166 18.80 44.92 180
---------------------------------------------------------------------------
ZK1221 87.52 87.77 0.25 527 100 3.75 4.96 160
---------------------------------------------------------------------------
ZK1225 357.85 358.20 0.35 300 213 1.00 0.36 90
---------------------------------------------------------------------------
ZK13B02 205.35 206.27 0.92 573 295 1.86 17.43 1343
---------------------------------------------------------------------------
ZK1433 383.67 384.98 1.31 198 290 5.80 1.84 -27
---------------------------------------------------------------------------
ZK14A02 201.71 201.87 0.16 393 845 2.40 7.05 40
---------------------------------------------------------------------------
ZK14A08 115.25 115.9 0.65 605 110 1.96 20.09 43
---------------------------------------------------------------------------
ZK15B05 178.22 179.74 1.52 497 922 18.76 4.15 1422
---------------------------------------------------------------------------
ZK17A02 245.67 247.52 1.85 440 415 2.94 1.65 1479
---------------------------------------------------------------------------
ZK1903 158.65 159.80 1.15 564 605 1.70 8.92 1673
---------------------------------------------------------------------------
ZK1907 305.9 306.20 0.30 374 986 1.25 7.03 1686
---------------------------------------------------------------------------
ZK19A02 95.74 96.27 0.53 525 678 12.34 2.98 1619
---------------------------------------------------------------------------
ZK4B09 176.42 176.83 0.41 446 169 1.92 10.41 479
---------------------------------------------------------------------------
ZK4B11 248.34 248.69 0.35 365 1912 40.60 1.91 495
---------------------------------------------------------------------------
ZK5107 187.52 187.82 0.30 401 254 33.68 1.86 448
---------------------------------------------------------------------------
ZK5108 343.16 344.16 1.00 246 824 36.40 0.84 433
---------------------------------------------------------------------------
ZK5205 173.61 174.31 0.70 411 106 2.88 1.93 289
---------------------------------------------------------------------------
ZK5206 324.32 324.87 0.55 261 430 11.64 0.21 274
---------------------------------------------------------------------------
ZK5504 110.75 110.96 0.21 482 197 0.46 12.36 492
---------------------------------------------------------------------------
ZK5507 277.61 277.88 0.27 309 1397 47.29 3.19 506
---------------------------------------------------------------------------
ZK5509 368.96 369.76 0.80 210 254 19.34 10.90 492
---------------------------------------------------------------------------
ZK5510 219.7 220.00 0.30 377 333 26.97 1.58 525
---------------------------------------------------------------------------
ZK5513 217.64 220.77 3.13 548 306 0.53 3.58 600
---------------------------------------------------------------------------
ZK605 180.45 181.3 0.85 420 166 6.08 1.21 380
---------------------------------------------------------------------------
ZK606 235.42 235.69 0.27 352 217 24.59 0.22 380
---------------------------------------------------------------------------
ZK6608 52.7 52.80 0.10 527 597 12.81 0.35 -119
---------------------------------------------------------------------------
ZK6713 219.44 219.72 0.28 548 205 1.44 22.17 940
---------------------------------------------------------------------------
ZK6B04 172.47 172.67 0.20 437 60 0.10 12.12 401
---------------------------------------------------------------------------
ZK6B06 189.43 190.84 1.41 405 369 1.67 1.75 400
---------------------------------------------------------------------------
ZK9B02 196.56 197.52 0.96 570 440 9.81 11.27 1168
---------------------------------------------------------------------------
ZK9B04 274.85 275.05 0.20 490 69 3.25 4.20 1165
---------------------------------------------------------------------------
ZK5514 96.58 96.83 0.25 179 171 8.75 20.99 514
---------------------------------------------------------------------------
ZK9B06 320.89 335.51 14.62 428 363 2.45 4.80 1173
Including 324.85 326.35 1.50 428 1960 13.25 27.06 1173
---------------------------------------------------------------------------
ZK4012 263.17 264.80 1.63 330 629 12.31 0.95 456
Including 264.40 264.80 0.40 330 1405 48.34 3.57 456
---------------------------------------------------------------------------
ZK4010 176.26 179.54 3.28 421 464 7.93 1.18 445
Including 176.77 177.22 0.45 423 2331 50.01 6.21 445
---------------------------------------------------------------------------
ZK6308 306.60 308.90 2.30 435 484 5.64 1.58 930
Including 306.60 306.85 0.25 435 2179 48.58 13.11 930
---------------------------------------------------------------------------
Drill hole collars and longitudinal of
the S7-1 vein are available on the Company's website www.silvercorp.ca.
Quality Control
Drill cores are NQ size and drill core
samples were taken from sawn half core limited by apparent massive galena
sheet contact or shear/alteration contact.
The Company maintains a quality control
program to ensure best practice in sampling and analysis of the drill core
samples. The samples are shipped directly in securely sealed bags to the
Analytical Lab of Henan Non-Ferrous Metals Geological and Exploitation
Institute in Zhengzhou, located 225 km by road northeast of the Ying Mine.
The sample preparation consists of
drying, crushing, and splitting of the sample to 250 grams, then the sample is pulverized to 200 mesh. Two acid digestion and an AA finish for lead and zinc are utilized
on a 0.5 gram sample. Titration is utilized as a modified process for higher
grade materials. Silver is also analyzed using a two acid digestion and AA
finish on a 0.5 gram sample. The lab utilizes a QA/QC system of duplicates,
replicates and Standards.
Myles Gao, P.Geo.,
is the Qualified Person on the project under NI 43-101.
About Silvercorp
Metals Inc.
Silvercorp Metals Inc. is engaged in the
acquisition, exploration, development and mining of high-grade silver-related
mineral properties in China and Canada. Silvercorp
is the largest primary silver producer in China through the operation of the
four silver-lead-zinc mines at the Ying Mining Camp in the Henan Province of
China. Silvercorp is currently building the GC
silver-lead-zinc Project in Guangdong Province as its second China production
base and foothold, and this will be followed by the third production foothold
at the recently acquired BYP Gold-lead-Zinc Project in Hunan Province. In
Canada, Silvercorp is in preparation of applying
for a Small Mine Permit for the Silvertip high grade silver-lead-zinc mine
project in northern British Columbia to provide a further platform for growth
and geographic diversification. The Company's shares are traded on the New
York Stock Exchange and Toronto Stock Exchange and are included as a
component of the S&P/TSX Composite and the S&P/TSX Global Mining
Indexes.
CAUTIONARY DISCLAIMER -- FORWARD-LOOKING
STATEMENTS
Certain of the statements and
information in this press release constitute "forward-looking
statements" within the meaning of the United States Private Securities
Litigation Reform Act of 1995 and "forward-looking information"
within the meaning of applicable Canadian provincial securities laws. Any
statements or information that express or involve discussions with respect to
predictions, expectations, beliefs, plans, projections, objectives,
assumptions or future events or performance (often, but not always, using
words or phrases such as "expects", "is expected",
"anticipates", "believes", "plans",
"projects", "estimates", "assumes", "intends",
"strategies", "targets", "goals",
"forecasts", "objectives", "budgets",
"schedules", "potential" or variations thereof or stating
that certain actions, events or results "may", "could",
"would", "might" or "will" be taken, occur or
be achieved, or the negative of any of these terms and similar expressions)
are not statements of historical fact and may be forward-looking statements
or information. Forward-looking statements or information relate to, among
other things: the price of silver and other metals; the accuracy of mineral
resource and mineral reserve estimates at the Company's material properties;
the sufficiency of the Company's capital to finance the Company's operations;
estimates of the Company's revenues and capital expenditures; estimated
production from the Company's mines in the Ying Mining Camp; timing of
receipt of permits and regulatory approvals; availability of funds from
production to finance the Company's operations; and access to and
availability of funding for future construction, use of proceeds from any
financing and development of the Company's properties.
Forward-looking statements or
information are subject to a variety of known and unknown risks,
uncertainties and other factors that could cause actual events or results to
differ from those reflected in the forward-looking statements or information,
including, without limitation, risks relating to: fluctuating commodity
prices; calculation of resources, reserves and mineralization and precious
and base metal recovery; interpretations and assumptions of mineral resource
and mineral reserve estimates; exploration and development programs;
feasibility and engineering reports; permits and licences;
title to properties; First Nations title claims and rights; property
interests; joint venture partners; acquisition of commercially mineable
mineral rights; financing; recent market events and conditions; economic
factors affecting the Company; timing, estimated amount, capital and
operating expenditures and economic returns of future production; integration
of future acquisitions into the Company's existing operations; competition;
operations and political conditions; regulatory environment in China and
Canada; environmental risks; foreign exchange rate fluctuations; insurance;
risks and hazards of mining operations; key personnel; conflicts of interest;
dependence on management; internal control over financial reporting as per
the requirements of the Sarbanes-Oxley Act; and bringing actions and
enforcing judgments under U.S. securities laws.
This list is not exhaustive of the
factors that may affect any of the Company's forward-looking statements or
information. Forward-looking statements or information are statements about
the future and are inherently uncertain, and actual achievements of the
Company or other future events or conditions may differ materially from those
reflected in the forward-looking statements or information due to a variety
of risks, uncertainties and other factors, including, without limitation,
those referred to in the Company's Annual Information Form for the year ended
March 31, 2010 under the heading "Risk Factors". Although the
Company has attempted to identify important factors that could cause actual
results to differ materially, there may be other factors that cause results
not to be as anticipated, estimated, described or intended. Accordingly, readers
should not place undue reliance on forward-looking statements or information.
The Company's forward-looking statements
and information are based on the assumptions, beliefs, expectations and
opinions of management as of the date of this press release, and other than
as required by applicable securities laws, the Company does not assume any
obligation to update forward-looking statements and information if
circumstances or management's assumptions, beliefs, expectations or opinions should
change, or changes in any other events affecting such statements or
information. For the reasons set forth above, investors should not place
undue reliance on forward-looking statements and information.
Contact:
Contacts:
Silvercorp Metals Inc.
Rui Feng
Chairman & CEO
604-669-9397 or Toll Free: 1-888-224-1881
Silvercorp Metals Inc.
Lorne Waldman
Corporate Secretary
604-669-9397 or Toll Free: 1-888-224-1881
604-669-9387 (FAX)
info@silvercorp.ca
www.silvercorp.ca
|
|