Mr. George Leary, President of Bayswater states, "The Company is very encouraged by the drill results from its Anna Lake property to date. This discovery is an excellent start for our first drill program in Labrador and on our Canadian holdings."

To date, 62 diamond drill holes totalling approximately 13,000 meters of core recovery have been completed on several of Bayswater�s high priority targets identified during 2006. Uranium assay results have been received for 28 of 33 holes at the Anna Lake Uranium prospect, 12 of 13 holes for the Dandy and all holes for Stipec A, Stipec E and Kanairiktok Bay showings. Only partial results have been received for an ICP-42 multi-element suite. Additional results for the Anna Lake drilling are pending laboratory analysis.   Table 1 highlights drill results from the Anna Lake discovery to date.

*N.S.R. = No significant Results

Based on drill results to date, the main mineralized zone consists of two moderate to steeply dipping, sub-parallel sheets that locally coalesce. The main zone along with numerous minor sub-parallel lenses and sheets contain significant uranium/molybdenum grades, show good hole to hole correlation, and can be delineated over a minimum strike length of 340 meters. Uranium intersections range between 1.0 and 25.0 meters in true thickness, grade between 0.02% U3O8 and 0.11% U3O8 and can be traced from surface to a vertical depth of 230 meters. Initial drill testing of the Anna Lake target appears to have encountered the mineralization in a down-dip orientation. The orientation of the drilling program was revised following the completion of drill hole AL07-08 in order to intersect the mineralization at an optimum angle. True widths of mineralized sections are unknown up to holes AL07-03. Subsequent to this, true widths are estimated from 80-95% of the core length of intersections. Currently, all holes are being drilled due west to test the north-south trending zone. Of the Anna Lake holes reported in this release, 19 were designed to cut the main mineralized zone. Seventeen of these holes hit significant mineralization for an 89% hit ratio.

Mr. George Leary, President of Bayswater states, "Although it is very early into the drill program, the cumulative widths and grades demonstrated along with the near surface nature and continuity of the mineralization, indicate that the Anna Lake deposit may be amenable to open pit mining. Excellent potential exists for expanding the deposit near surface and for discovery of higher grade zones at depth."

Additional results have also been received from the Dandy, Stipec River A, Stipec River E and Kanairiktok Bay uranium showings identified during the 2006 prospecting program. Results from drilling on the Stipec A (6 holes), Stipec E (3 holes) and Kanairiktok Bay (3 holes) showings returned no significant values of interest. Further geological work will be required to fully evaluate these surface showings. Drilling on the Dandy Uranium prospect has returned numerous low grade intersections of uranium. Table 2 summarizes the results from the Dandy drilling.

*N.S.R= No Significant Results

Drill holes DS07-01 through to DS07-09 were collared in various locations in an attempt to intersect surficial zones of uranium mineralization. Holes DS07-10 to DS07-13 were designed to test the main Dandy uraniferous dike swarm that hosts abundant uranophane mineralization on surface. Mineralization at the Dandy prospect occurs within pegmatite dikes cutting dominantly quartzofeldspathic gneiss. The best intersection returned to date assayed 0.04% U308 over 5.0 meters from DS07-13. Surface uranium mineralization in the Dandy area is extensive over a 1.5 kilometer by 600 meter area. Surface samples returned U3O8 grades up to 0.18%. Further evaluation of this prospect will continue in 2008.

Currently, two rigs continue to drill on the main Anna Lake target. Detailed follow-up grid controlled work including soil sampling, induced polarization/resistivity and radon cup surveys have been completed over the Anna Lake prospect for 2007. Further ground magnetics surveys are ongoing. The radon cup survey targeted the Anna Lake grid along with selected reconnaissance lines over the Ghost Lake A, Ghost Lake B and a newly discovered uranium bearing sandstone boulder train identified in the Stipec River area as previously announced. Limited grid controlled surveys have also been completed over portions of the Stipec River prospects. In addition, airborne electromagnetic and radiometric surveys have been completed during the 2007 field season and results of this along with all prospecting work will be forthcoming in subsequent news releases as analytical and other data is reviewed and assessed.

Sample handling consists of shipping one half of split drill core samples to Activation Laboratories Ltd. sample preparation facility in Goose Bay, Labrador where the samples are crushed, pulverized and split. Sample pulps are then forwarded to Ancaster, Ontario for analyses. Uranium analysis is performed using the delayed neutron counting (DNC) method. A multi-element inductively coupled plasma mass spectrometry (ICP-42) is performed as well on all samples. Where uranium values exceed the upper limit of 1%, samples are re-assayed using X-ray fluorescence (XRF). A rigorous quality control/assurance program was instituted for the sampling and analytical work. Control samples, consisting of three separate standards were inserted in the sample stream approximately every 25 to 30 samples. To date, this program has shown that the analyses are reliable. The Company intends to implement a more rigorous QA/QC program during its 2008 drilling program.

The Company�s exploration activities are conducted under the supervision of George M. Leary, M.Sc. P. Eng. (BC), President of the Company, and Victor Tanaka, B.Sc. P.Geo. (B.C.), Chief Operating Officer of the Company. Both are qualified persons under NI 43-101. George Leary is the qualified person responsible for the technical information in this news release.

About the Labrador Central Mineral Belt