Scandium International Mining Corp

Published : January 29th, 2015

Final Assay Results of Resource in-Fill Drilling at Nyngan Scandium Project - 357PPM

( 0 vote, 0/5 ) Print article
  Article Comments Comment this article Rating Follow Company  
Keywords :   Aluminum | Australia | Calcium | Chromium | Cobalt |

Final Assay Results of Resource in-Fill Drilling at Nyngan Scandium Project - 357PPM

RENO, NV / ACCESSWIRE / January 29, 2015 / Scandium International Mining Corp. (the "Company" or "Scandium International" or "SCY") (SCY.TO) announces today that it has received assay results on the remaining 10 holes which were a part of a 14-hole resource drilling program at the Nyngan Scandium Project in NSW, Australia, conducted in October 2014. Results on the first 4 holes in the program were announced on December 18, 2014. This news release will report on all 14 holes in the program, totaling 655 meters, in the existing resource area. The program attempted 2 additional exploration holes, which were abandoned due to difficult drilling conditions.


- Average scandium grade of 357ppm over 214 meters (200ppm cut-off),

- Average scandium grade of 444ppm over 120 meters (300ppm cut-off),

- Best results: 4 meters @ 795ppm, 5 meters @ 755ppm and 7 meters @ 721ppm,

- Best individual 1 meter assay was 879ppm,

- Lithium borate fusion (fusion) assay preparation demonstrated superior result to the traditional four acid method, as used on the resource estimate in 2010, and

- These new assay results strongly support the average grade and location selected and included in the recently released PEA on the Nyngan project.


The Company conducted and completed a 14-hole drill program in October, focused on a high grade section of the Nyngan property, selected from within the area of the measured and indicated (M&I) resource disclosed in the NI 43-101 technical report filed on SEDAR in March of 2010. This high grade zone of mostly indicated resource was the basis of a 20 year mine plan and scandium grade assumptions used in the recently released PEA on the Nyngan project. This latest drill program was designed to in-fill certain areas to 50 meter centers (from 100 meter centers), and to provide better information on pit limits as defined in the PEA. The program was conducted using a conventional rotary air core drill rig, which captured over five tonnes of chip sample material, for assay, and for fresh resource material to support ongoing metallurgical test work programs. Holes were vertically drilled, so interval widths in the results table below represent true widths.

The Company assayed all 14 new holes with both four acid digestion, and also by fusion digestion techniques, followed in each case by ICP-AES metal assays. Scandium assay results on the entire 14 hole program are presented in this press release, including assays previously announced in December on 4 holes, where early results were available (holes 1,9,10 and 16).

The Company notes that fusion digestion results generally deliver higher scandium assays than the four acid digestion method, traditionally used in nickel and cobalt assay work. The Company believes the fusion technique generates a truer assay result, because acid digestion of scandium within limonite hosted mineralization can be incomplete, particularly at higher grades, and flux digestion by high temperature fusion produces a more homogeneous sample for analysis. SCY intends to rely on and utilize fusion digestion techniques going forward to support our mine planning and advanced economic and development studies.

The assay results presented in the summary table below are based on a 200ppm scandium cut-off value. This assumption on scandium grade minimum is based on the Nyngan Project PEA economics, and represents an economic cut-off value to apply to resource to be mined. Assay results were taken over each meter of drilling material, and only continuous intervals have been included in the summary table. Reporting intervals above cut-off were established based on fusion results, and the presentation table then applied those same intervals to both fusion and four acid assays for comparability. The generally higher fusion results generated wider intervals above cut-off grade, resulting in inclusion of some below cut-off grade assays into the four acid results presented in the table below.

Reported assay results correspond to limonite resource only. A saprolite resource underlays the limonite, is generally lower in grade, requires somewhat different processing techniques than limonite for optimal recovery, and is not planned for early extraction and processing by the Company. Each hole in the drill program was completed to bedrock, including both limonite and saprolite resource. Saprolite was present in 13 of the 14 holes drilled.


The location of the 14 hole drill program is as follows:

George Putnam, CEO of Scandium International Mining Corp. commented:

"With this full program drill result in hand, we have detailed and current assay data to design our starter pit as part of a final feasibility study, to be completed in 2015. These latest assay results continue to confirm the head grade assumptions integral to the recently released PEA on the Nyngan project. Drill hole material from the program has also allowed us to conduct flow sheet test work with fresh resource taken from the planned pit area. A finalized flow sheet based on optimized parameters is planned for the end of Q2 2015.

These recent in-fill drill results also demonstrate clearly that the Nyngan resource is very comparable to other scandium resources in the NSW lateritic belt regarding scandium grade."


SCY employed an independent local geological consulting and drill supervisory team, Rangott Mineral Exploration Pty. Ltd., (RME) of Orange NSW, Australia, to manage the drill work on-site. Bulk samples of drill returns were collected at one meter intervals from a trailer-mounted cyclone and splitter for one reported hole - EMCG-01, and a separate (RME) three-tier riffle splitter was used on site for holes EMCG-09, EMCG-10 and EMCG-16, due to moisture. Assay samples ranged from 0.4 - 4.7 kg in weight. Individual sample identifiers were cross-checked during the process. The individual assay samples were double-bagged and held in RME's possession while in the field, prior to transport and storage at RME's office in Orange. RME personnel checked/validated the sequence of sample numbers, and submitted the samples to Australian Laboratory Services' ("ALS") laboratory in Orange, NSW. The remainder of bulk samples were sealed in the field in heavy polyethylene bags and transported by RME to a secure site at Orange for long-term storage or further use in metallurgical test work.

ALS/Orange dried and weighed the received assay samples, and pulverized the entire sample to 85% passing 75 microns or better (technique PUL-21). 50 g bags of the pulps were then split off and sent to the ALS laboratory at Stafford in Brisbane, Queensland for analysis. ALS/Brisbane analyzed the pulps for scandium, nickel, cobalt, chromium, iron, magnesium, manganese, aluminum and calcium, using Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) after a four acid digestion (technique ME-ICP61). The 4-hole results were also repeat-tested, only for scandium, using a lithium borate fusion digestion technique, followed by similar ICP-AES assay. The lower detection limit for scandium using either technique is 1ppm. RME included one commercial standard sample and three high-grade scandium pulps from previously analyzed batches, for quality control; and also included one duplicate sample from each hole in the batch. For internal quality control, ALS/Brisbane added additional standard samples (for repeat analyses), blank samples and duplicate samples to the batch.


Willem Duyvesteyn, Director and CTO of Scandium International Mining Corp., and a QP as defined by NI 43-101, and John Thompson, VP Project Development for Scandium International Mining Corp., and a QP as defined by NI 43-101, are both Company QP's and have reviewed this press release.


The Company is focused on developing the Nyngan Scandium Project into the world's first scandium-only producing mine. The Company owns a 100% interest in both the Nyngan Scandium Project, and the adjacent Honeybugle Scandium Property, in New South Wales, Australia. SCY's interest in both Nyngan and Honeybugle can potentially be reduced to 80% in the future, based on certain current granted option rights.

The Company filed a NI 43-101 technical report disclosing Measured and Indicated Resources on the Nyngan Project in March of 2010. The Company also filed a NI 43-101 technical report on a preliminary economic assessment of the Nyngan Scandium Project in October of 2014, and has completed extensive metallurgical test work on the resource. In addition, SCY owns a 100% interest in the Tørdal Scandium/REE property in southern Norway, where we continue our exploration efforts, specifically for scandium and REE minerals.

For additional information please contact:

Scandium International Mining Corp.

Investor Relations;
Ed Dickinson (CFO)

George Putnam (CEO)
(925) 208-1775

No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein.

This press release contains forward-looking information that does involve various risks and uncertainties regarding future events. Such forward-looking information can include without limitation statements regarding the short term or long term economic feasibility of scandium production at our Nyngan scandium project, and in general, statements based on current expectations involving a number of risks and uncertainties and are not guarantees of future performance. Forward-looking information in this press release is based on estimates and opinions of management and qualified persons as defined in NI 43-101 that are providing technical services to SCY, on the dates they are made and are expressly qualified in their entirety by this notice, and by other risk factors disclosed in our public filings. Such statements include metal price assumptions, cash flow forecasts, projected capital and operating costs, metal or mineral recoveries, mine life, production rates and the results of HPAL modeling and testing. Any of these and other assumptions and forecasts may change due to reasons that impact the industry generally, such as scandium pricing, or for reasons specific to the project. Except as required by law, SCY assumes no obligation to update forward-looking information should circumstances or management's estimates or opinions change.

Cautionary Note to U.S. Investors Regarding Resource Estimates: This press release uses the terms "indicated resources" and "measured resources" which are defined by the Canadian Institute of Mining, Metallurgy and Petroleum, and are required to be disclosed in accordance with Canadian National Instrument 43-101. The disclosure standards in the U.S. Securities and Exchange Commission's (SEC) Industry Guide 7 normally do not recognize information concerning these terms or other descriptions of the amount of mineralization in mineral deposits that do not constitute "reserves" by U.S. standards in documents filed with the SEC. Accordingly, information concerning mineral deposits set forth herein may not be comparable with information presented by companies using only U.S. standards in their public disclosure.

Scandium International Mining Corp.

Read the rest of the article at
Data and Statistics for these countries : Australia | Norway | All
Gold and Silver Prices for these countries : Australia | Norway | All

Scandium International Mining Corp

Follow and Invest
Add to watch list Add to your portfolio Add or edit a note
Add Alert Add to Watchlists Add to Portfolio Add Note
Projects & res.
Asset profile
Contact Cpy

Scandium is a exploration company based in Canada.

Scandium develops tungsten in USA, and holds various exploration projects in Australia, in Canada and in USA.

Its main asset in development is SPRINGER in USA and its main exploration properties are CARLIN VANADIUM and FOSTUNG in Canada, COPPER KING NEVADA in USA and NYNGAN GILGAI in Australia.

Scandium is listed in Canada. Its market capitalisation is CA$ 20.5 millions as of today (US$ 16.4 millions, € 14.4 millions).

Its stock quote reached its highest recent level on February 20, 2009 at CA$ 0.49, and its lowest recent point on April 25, 2014 at CA$ 0.02.

Scandium has 228 150 000 shares outstanding.

Your feedback is appreciated, please leave a comment or rate this article.
Rate : Average note :0 (0 vote) View Top rated
In the News and Medias of Scandium International Mining Corp
12/20/2018Clean TeQ's Sunrise nickel-cobalt-scandium project gets gree...
Project news of Scandium International Mining Corp
1/21/2012Receives Final Report on Pilot Plant Test-Work for Nyngan Sc...
1/18/2012Nyngan Project Conceptual Plan Submitted to NSW State Regula...
9/13/2011Signs Option Agreement to Acquire Former Scandium Production...
Corporate news of Scandium International Mining Corp
7/6/2016Key Staff Appointment To Nyngan Scandium Project Team
6/29/2016Nyngan Scandium Project Confirming Process Test Results Rece...
6/10/2016Scandium International Mining Corp. Announces Results of 201...
5/9/2016Feasibility Study -- Nyngan Scandium Project Filed On SEDAR
5/2/2016Scandium International Files Environmental Impact Statement ...
4/18/2016Results Of Definitive Feasibility Study On The Nyngan Scandi...
11/2/2015Scandium International Mining Corp. Announces Results of Ann...
10/14/2015Scandium International Receives US$2.07M from Royalty Sale o...
9/10/2015Scandium International Initiates Definitive Feasibility Stud...
9/1/2015Scandium International Announces Annual General Meeting
8/24/2015IIROC Trade Resumption - SCY
8/24/2015IIROC Trading Halt - SCY
8/24/2015Scandium International Announces Significant Transactions: E...
3/30/2015SCY and ALCERECO Sign MOU and Scandium Offtake Agreements
2/17/2015Novel Flowsheet Design Patents Filed for Scandium Recovery
1/29/2015Final Assay Results of Resource in-Fill Drilling at Nyngan S...
12/18/2014Early Assay Results of Resource In-Fill Drilling at Nyngan S...
7/21/2011Receives Initial Surface Assays With Up to 217 ppm Scandium ...
6/14/2011(Fostung)Sells Fostung Tungsten Property to Janus Resources Inc.
6/6/2011Selects Engineering Firm For Feasibility Study at Nyngan Sca...
4/11/2011Commences Environmental Work at Nyngan Scandium Project in N...
4/7/2011Signs Earn-In Agreement With REE Mining On Two Exploration P...
Comments closed
Latest comment posted for this article
Be the first to comment
Add your comment
CA$ 0.090
05/20 12:38 -
Prev close Open
0.090 0.080
Low High
0.080 0.090
Year l/h YTD var.
0.085 -  0.160 -41.94%
52 week l/h 52 week var.
0.085 -  0.250 -58.14%
Volume 1 month var.
15,400 -14.29%
24hGold TrendPower© : -2
Develops Tungsten
Explores for Vanadium
Interactive chart Add to compare
Print Compare Export
You must be logged in to use the porfolio and watchlists (free)
Top Newsreleases
Annual variation
5 years chart
3 months chart
3 months volume chart
Mining Company News
Plymouth Minerals LTDPLH.AX
Plymouth Minerals Intersects Further High Grade Potash in Drilling at Banio Potash Project - Plannin
AU$ 0.12-8.00%Trend Power :
announces expected non-cash impairment
AU$ 8.10-1.28%Trend Power :
Oceana Gold(Au)OGC.AX
AU$ 3.08+4.76%Trend Power :
Western Areas NL(Au-Ni-Pl)WSA.AX
Advance Notice - Full Year Results Conference Call
AU$ 3.84+0.00%Trend Power :
Canadian Zinc(Ag-Au-Cu)CZN.TO
Reports Financial Results for Q2 and Provides Project Updates
CA$ 0.12+4.55%Trend Power :
Stornoway Diamond(Gems-Au-Ur)SWY.TO
Second Quarter Results
CA$ 0.02+100.00%Trend Power :
McEwen Mining(Cu-Le-Zn)MUX
US$ 0.52-0.77%Trend Power :
Rentech Announces Results for Second Quarter 2017
US$ 0.20-12.28%Trend Power :
Reduced Funding Requirement
GBX 0.70-4.39%Trend Power :
Lupaka Gold Corp.LPK.V
Lupaka Gold Receives First Tranche Under Amended Invicta Financing Agreement
CA$ 0.02+0.00%Trend Power :
Closes Bridge Loan Financing
CA$ 3.40-7.36%Trend Power :
Guyana Goldfields(Cu-Zn-Pa)GUY.TO
Reports Second Quarter 2017 Results and Maintains Production Guidance
CA$ 1.84+0.00%Trend Power :
Lundin Mining(Ag-Au-Cu)LUN.TO
d Share Capital and Voting Rights for Lundin Mining
CA$ 10.65-1.30%Trend Power :
Canarc Res.(Au)CCM.TO
Canarc Reports High Grade Gold in Surface Rock Samples at Fondaway Canyon, Nevada
CA$ 0.30+1.72%Trend Power :
Q A April 2017 Quarterly Report
AU$ 0.28+1.82%Trend Power :
Uranium Res.(Ur)URRE
Commences Lithium Exploration Drilling at the Columbus Basin Project
US$ 6.80-2.86%Trend Power :
Platinum Group Metals(Au-Cu-Gems)PTM.TO
Platinum Group Metals Ltd. Operational and Strategic Process ...
CA$ 1.76-2.22%Trend Power :
Devon Energy(Ngas-Oil)DVN
Announces $340 Million of Non-Core Asset Sales
US$ 69.92+0.59%Trend Power :
Precision Drilling(Oil)PD-UN.TO
Announces 2017Second Quarter Financial Results
CA$ 8.66-0.35%Trend Power :
2nd Quarter Report
AU$ 0.04+0.00%Trend Power :